Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

544 Fabric OS Command Reference
53-1000599-02
portTrunkArea
2
port Specifies the port number, relative to its slot on bladed systems.
-Range Optionally specifies a port range. For example, 9/8-15 on an enterprise-class
platform indicates slot 9, ports 8 - 15. Range of ports should fall in the octet
trunk range starting from port 0 on a switch or blade. Trunking must be
enabled on all ports.
--enable Creates a TA assigned to the specified ports. Use this option with one of the
following operands:
-area area_number
On single processor switches, specifies the port area number for the static TA
to be created. The TA must fall within the 8 port trunk group starting from port
0 on a switch or blade. The TA must be a default area of an existing port in a
given port group. However, you may add ports to the trunk group even when a
trunk group has already been assigned by using the same area of the octet
trunk group. Use switchShow for a list of valid port area or index numbers.
-index port_index
On enterprise-class platforms, specifies the port index for the static TA to be
created. The port index must fall within the 8 port trunk group starting from
port 0 on a switch or blade. The TA must be a default index of an existing port
in a given port group. However, you may add ports to the trunk group even
when a trunk group has already been assigned by using the same index of
the octet trunk group. Use switchShow for a list of valid port indexes.
--disable Removes specified ports from a TA. If a port with the same default area as
the TA assigned for the trunk group is removed, all ports in the trunk group
must be explicitly specified for removal.
all Optionally removes all TA assigned ports on the switch. This option disables
masterless F_Port trunking on all ports. All TA assigned ports must be
disabled for this option to succeed.
--show Displays masterless F_Port trunking information. When using this option,
specify one of the following operands:
slot/port[-Range]
Displays configuration for a specified port or port range.
trunk Displays configuration details for the port trunk group, including user port,
neighboring user port, and master port properties.
enabled Displays configuration details for all ports included in a user assigned TA (all
ports on which masterless F_Port trunking is enabled).
disabled Displays configuration details for all ports not included in a user assigned TA
(all portson which masterless F_Port trunking is notenabled).
all Displays configuration details for all ports on a switch.