Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

574 Fabric OS Command Reference
53-1000599-02
secPolicyCreate
2
To create a SCC policy in a Fabric with three switches:
1. Check if a policy exists.
switch:admin> secpolicyshow
____________________________________________________
ACTIVE POLICY SET
____________________________________________________
DEFINED POLICY SET
2. Identify switches in the fabric.
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
2: fffc02 10:00:00:05:1e:39:5f:67 10.32.69.53 10.20.30.53 "NeptuneSec"
fec0:60:69bc:60:260:69ff:fe80:d4a
4: fffc04 10:00:00:05:1e:04:ef:0e 10.32.69.49 10.20.30.49 >"SW4900_Sec"
fec0:60:69bc:54:205:1eff:fe04:ef0e
200: fffcc8 10:00:00:05:1e:35:cd:ef 10.32.69.117 10.20.30.117 "nSW4100_98"
3. Create a SCC policy that includes switches with domain IDs 2 and 4.
switch:admin> secpolicycreate "SCC_POLICY","2;4"
SCC_POLICY has been created.
4. Activate the policy.
switch:admin> secpolicyactivate
About to overwrite the current Active Policy Set.
ARE YOU SURE (yes, y, no, n): [no] y
secpolicyactivate command was completed successfully.
To create an SCC policy that includes all switches in the fabric:
switch:admin> secpolicycreate "SCC_POLICY",*
SCC_POLICY has been created.
See Also fddCfg, distribute, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyDelete,
secPolicyDump, secPolicyRemove, secPolicySave, secStatsShow