Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

594 Fabric OS Command Reference
53-1000599-02
setVerbose
2
setVerbose
Specifies module verbose level.
Synopsis setverbose [module_name][level]
Description Use this command to set the verbose level of the specified module. These levels filter the display of
the debug message to the serial console. By default, no debug messages are displayed.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
module_name Specify the name of the module for which the verbose level is to be set;
module names are case-sensitive.
level Specify the verbose level (0 to 9).
Examples To set the verbose level of a module named NS to value 3:
switch:admin> setverbose NS 3
switch:admin> dbgshow NS
Module NS, debug level = 0, verbose level = 3
See Also dbgShow, setDbg