Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 631
53-1000599-02
supportShowCfgDisable
2
supportShowCfgDisable
Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable os | exception | port | fabric | services | security | network | portlog |
systemextend | filter | perfmon | ficon | iswitch | asic_db |iscsi
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands. Refer to Chapter 6,
“supportShow Reference”, for more information.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
os Disables the OS group commands.
exception Disables the exception group commands.
port Disables the port group commands.
fabric Disables the fabric group commands.
services Disables the service group commands.
security Disables the security group commands.
network Disables the network group commands.
portlog Disables the portlog group commands.
system Disables the system group commands.
extend Disables the extend group commands.
filter Disables the filter group commands.
perfmon Disables the Performance Monitor group commands
ficon Disables the FICON group commands.
iswitch Disables the FC Router group commands.
asic_db Disables the ASIC DB group commands.
iscsi Disables the ISCSI group commands.
Examples To disable the OS group of commands under the supportShow command:
switch:admin> supportshowcfgdisable os
Config update Succeeded
See Also supportShow, supportShowCfgEnable, supportShowCfgShow