Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 643
53-1000599-02
switchShow
2
cu copper
id serial ID
Speed The speed of the port:
1/8G 125 Mbps
1/4G 250 Mbps
1/2G 500 Mbps
1G 1 Gbps fixed transfer speed
N1 1 Gbps negotiated transfer speed
2G 2 Gbps fixed transfer speed
N2 2 Gbps negotiated transfer speed
4G 4 Gbps fixed transfer speed
N4 4 Gbps negotiated transfer speed
8G 8 Gbps fixed transfer speed
N8 8 Gbps negotiated transfer speed
10G 10 Gbps fixed transfer speed
N10 10 Gbps negotiated transfer speed
AN Auto negotiating
UN Unknown
State Port state information:
No_Card No interface card present.
No_Module No module (GBIC or other) present.
Mod_Val Module validation in process.
Mod_Inv Invalid module.
No_Light Module not receiving light.
No_Sync Module receiving light but out of sync.
In_Sync Module receiving light and in sync.
Laser_Flt Module signaling a laser fault.
Port_Flt Port marked faulty.
Diag_Flt Port failed diagnostics.
Lock_Ref Locking to the reference signal.
Testing Running diagnostics.
Offline Connection not established (for virtual ports only).
Online Port is up and running.
Proto Protocol support by GbE port.
ISCSI Ports support ISCSI.