Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

654 Fabric OS Command Reference
53-1000599-02
switchViolation
2
switchViolation
Dumps the DCC violations for a switch.
Synopsis switchViolation --dump -dcc
Description Use this command to display all Device Connection Control (DCC) violations that have occurred on
a switch. Internally the command searches "errdumpall" for the DCC violations. For each DCC
violation, the command displays the device WWN and the port where the violation occurred.
Operands This command has the following operands. If executed without operands, the command prints the
usage.
--dump Displays specified policy violation.
-dcc Specifies the violation type as DCC.
Notes This command can be executed on both active and standby CPs. This command does not support
High Availability (HA).
Examples To display DCC violations for a switch:
switch:admin> switchviolation --dump -dcc
Device WWN Port
-----------------------------------
22:00:00:04:cf:75:59:87 10
See Also none