Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

664 Fabric OS Command Reference
53-1000599-02
tempShow
2
tempShow
Displays temperature readings.
Synopsis tempshow
Description Use this command to display the current temperature readings of all temperature sensors in a
switch. For each sensor, this command displays the slot number (if applicable), the sensor state,
and the temperature. The temperature readings are given in both Centigrade and Fahrenheit.
Note Refer to the hardware reference manual for your switch to determine the normal temperature
range.
Operands none
Examples To display temperature and status sensors:
switch:user> tempshow
Index Slot State Centigrade Fahrenheit
=====================================================
1 1 Ok 41 105
2 2 Ok 39 102
3 3 Absent
4 4 Absent
5 5 Ok 26 78
6 6 Ok 27 80
See Also fanShow, psShow, sensorShow, slotShow