Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 715
53-1000599-02
zoneRemove
2
zoneRemove
Removes a member from a zone.
Synopsis zoneremove "zonename", "zoneMemberList"
Description Use this command to remove one or more members from an existing zone.
If all members are removed, the zone is deleted.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operands are required:
"zonename" Specify the name of the zone from which to remove a member. Quotation
marks are optional.
"zoneMemberList" Specify a member or a list of members to be removed from the specified
zone. The list must be enclosed in quotation marks. Members must be
separated by semicolons. A member can be one or more of the following:
• A switch domain and port area or index number pair: for example, "2,20".
Use switchShow for a list of valid port area or index numbers.
• A World Wide Name
• A zone alias name
Examples To remove “array2” from “Blue_zone”:
switch:admin> zoneremove "Blue_zone", "array2"
See Also zoneAdd, zoneCreate, zoneDelete, zoneShow