Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 59
53-1000599-02
cfgDelete
2
cfgDelete
Deletes a zone configuration.
Synopsis cfgdelete "cfgName"
Description Use this command to delete a zone configuration.
This command changes the Defined Configuration (see cfgShow). For the change to become
effective, enable the configuration with the cfgEnable command. For the change to be preserved
across switch reboots, save the configuration to nonvolatile memory with the cfgSave command.
Note When FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operand is required:
"cfgName" Specify a name for the zone configuration to be deleted, in quotation marks.
Examples To delete a zone configuration:
switch:admin> cfgdelete “USA_cfg”
See Also cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow