Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 21
53-1000244-02
2
6. The new certificates are loaded onto the switches and the success or fail of each certificate is
displayed. Press Enter to continue.
PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6
Load Certificates onto 1 fabric(s)
1. Loaded Certificate on Switch primaryfcsswitch: WWN-10:00:00:60:69:11:fc:52
2. Loaded Certificate on Switch backupfcsswitch: WWN-10:00:00:60:69:11:fc:53
3. Loaded Certificate on Switch backupfcsswitch: WWN-10:00:00:60:69:11:fc:54
4. Loaded Certificate on Switch nonfcsswitch: WWN-10:00:00:60:69:11:fc:55
5. Loaded Certificate on Switch nonfcsswitch: WWN-10:00:00:60:69:11:fc:56
6. Loaded Certificate on Switch nonfcsswitch: WWN-10:00:00:60:69:11:fc:57
7. Loaded Certificate on Switch nonfcsswitch: WWN-10:00:00:60:69:11:fc:58
7 Certificates were loaded,
0 Certificate loads failed
Press Enter to Continue.
NOTE
The sectelnet application can be used as soon as a digital certificate is installed on the switch.
7. Press Enter.
The Functions menu is displayed.
8. Type q to quit the utility; then type y and press Enter to verify that you want to quit.
PKI CERTIFICATE INSTALLATION UTILITY pki_v1.0.6
FUNCTIONS
1) Retrieve CSRs from switches & write a CSR file
2) Install Certificates contained in a Certificate file
3) Generate a Licensed-Product/Installed-Certificates report
4) Help using PKI-Cert to get & install certificates
q) Quit PKI Certificate installation utility
Enter choice> q
QUIT? (y/n) y
Creating PKI Certificate Reports
Reports for PKI certification provide information about the number of licenses and switches
enabled on your secured fabric. The reports can also be used to audit the fabric.