Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

60 Secure Fabric OS Administrator’s Guide
53-1000244-02
4
2. Type the secFabricShow command. The command displays the switches in the fabric and their
status (Ready, Error, Busy, or NoResp, for no response from the switch).
primaryfcs:admin> secfabricshow
Role WWN DId Status Enet IP Addr Name
================================================================
non-FCS 10:00:00:60:69:10:03:23 1 Ready 192.168.100.148 "nonfcs"
Backup 10:00:00:60:69:00:12:53 2 Ready 192.168.100.147 "backup"
Primary 10:00:00:60:69:22:32:83 3 Ready 192.168.100.135 "primaryfcs"
______________________________________________________________________
Secured switches in the fabric: 3
Table 15 identifies the information that displays if secure mode is enabled.
VIEWING THE SECURE FABRIC OS POLICY DATABASE
Use the secPolicyDump command to display the Secure Fabric OS policy database, which consists
of the active and defined policy sets. This command displays information without page breaks.
To view the Secure Fabric OS policy database
1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.
2. Type secpolicydump “listtype”, “policy_name”.
listtype is the type of Secure Fabric OS policy set. It can be active, defined, or an asterisk (*),
which displays both versions of the policy. If a list type is not entered, both versions of the
Secure Fabric OS policy display. policy_name is the name of the Secure Fabric OS policy. If you
do not specify a policy name, the command displays all the policies in the specified policy set.
If you do not specify any operands, the command displays all policies in both the active and
defined policy sets.
For example, to display all policies in both active and defined policy sets:
primaryfcs:admin> secpolicydump
____________________________________________________
DEFINED POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
____________________________________________________
TABLE 15 Secure Mode Information
Table Heading Indicates
Pos Position of switch in FCS list
Primary “Yes” if switch is primary FCS, “no” if not
WWN WWN of each FCS switch
DId Domain ID of each FCS switch
swName Switch name of each FCS switch