HP StorageWorks 4400 Scalable NAS for Linux File Serving quick start guide (AN596-96003, September 2008)

HP StorageWorks 4400
Scalable NA S for Linux File
Serving quick s
tart guide
© Copyright 2008 Hewlett-Packard Development Company, L.P.
First e dition: September 2008
The information in this document is subject to change without
notice.
Printed in the US
www.hp.com
AN
59696003
HP technical support
For worldwide technical suppor t information, see the HP sup port
website: h
ttp://www.hp.com/support
Before contacting HP, colle ct the following information:
• Product model names and numbers
• Technical support registration number (if applicable)
• Product serial numbers
• Error messages
• Operating system type and revision level
• Detailed questions
System compo
nents
The system is s hip ped with provisioned storage and a confi gured cluster
that includes three filesystems. System components include:
• EVA 4400 dua l controller
• 4.8 TB to 38.4 TB of Fibre Channel storage; 4.8 TB to 88.4 TB of
Fibre Channel and FATA storage
• Three DL380 nodes, each with 12GB RAM
• DL320 Command View server
• Dual Fibre Channel switches
• Network switch
• Keyboard,Video,Mouse(KVM)switch
• Command View EVA
• Business Copy EVA for snapshots
• SuSE Linux E nterprise Server 9, SP3 (64-bit mode)
• HP Clustered File System and Volume M anager software
IMPORTA N T:
Novell® Software Subscription Support Registration.Your
product includes three in stances of a Novell operating system
that must be registered with Novell for software subscription
support. Each of the three media kits in your shipment contains a
registration card with a unique registration code and registration
instructions. To obtain software subscription support, you must
register all three codes following the i nstructions on the cards.
Please retain the registration documents for your records. For
information about managing your Novell products, see the
Novell Customer Center User Guide http:/ /www.novell.com/
documentation/ncc/pdfdoc/ncc/ncc.pdf.
System setup
The following system setup is included in the Installation and Setup
Service provided with your purchase:
1. Inspect the shipping crate for damage, unpack the system, and
install it in the proper location.
2. Power up the power distribution unit (PDU).
3. Configure the Command View ser ver. Set up the server, install
Command View and the appropriate licenses, an d verify network
connections.
4. Verify factory settings. Power up the cluster ser vers, star t the cluster
software, and verify that the cluster filesystems are visible on all
nodes.
Page 1