HP SureStore 220mx Optical Jukebox User's Guide

Chapter 1 1-7
Setting up the Jukebox
Removing the Mailslot Shipping Bracket and Checking Removal of the
Shipping Screw
Setting Up the Jukebox
NOTE When shipped, a wire links the shipping screw to the packing material
on the bottom of the jukebox. The screw should have been removed when
the bottom packing material was removed.
Check that the shipping screw was removed by doing the following:
3. Slide a finger under the chassis so that you can feel the area shown in
Figure 1-3. The bottom of the the chassis should be flat. You should
not feel the head of a finger screw.
CAUTION If you feel a large screwhead undeneath the chassis, gently lay the
jukebox on its side and remove the screw. The jukebox will not be harmed
by laying it on its side.
After removing the screw, raise the jukebox up and onto its feet.
The jukebox weights approximately 75 pounds (34 kg). Use two people to
lay the jukebox on its side.
Figure 1-3 Location of the Shipping Screw