HP SureStore 220mx Optical Jukebox User's Guide

1-10 Chapter 1
Setting up the Jukebox
Connecting the Jukebox as the Only Peripheral
Figure 1-4 Connecting the Jukebox as the Only Peripheral
3. Connect a SCSI cable between one of the SCSI ports on the jukebox
with a SCSI port on your host computer (see “3” on Figure 1-1).
4. Plug a terminator into the unused SCSI port on the jukebox.
Because this configuration makes the jukebox the last peripheral on
the SCSI bus, the bus must be terminated on the jukebox.
NOTE The jukebox ships with a self-configuring single-ended / low-voltage
differential terminator.
5. Go to “Connecting Power, Adjusting IDs, and Turning the Jukebox
On” on page 1-14.