HP StorageWorks All-in-One Storage System user guide Part number: 440583-005 First edition: February 2008
Legal and notice information © Copyright 2006, 2008 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents About this guide ................................................................................. 15 Intended audience .................................................................................................................... Related documentation .............................................................................................................. Document conventions and symbols .............................................................................................
HP StorageWorks 600 All-in-One Storage System ......................................................................... 40 SAS and SATA hard drive LEDs ................................................................................................... 43 3 Storage management overview .......................................................... 45 Storage management elements ...................................................................................................
Accessing the Virtual Library Wizard .................................................................................... Configure your virtual library ......................................................................................... Allocating space for components ................................................................................................ Selecting advanced configuration settings .............................................................................
Maintenance updates ....................................................................................................... 117 System updates .......................................................................................................... 117 Troubleshooting resources .................................................................................................. 117 HP web site ..............................................................................................................
Disabling shadow copies ............................................................................................ 138 Managing shadow copies from the storage system desktop ................................................... 138 Shadow Copies for Shared Folders ..................................................................................... 139 SMB shadow copies .................................................................................................. 140 NFS shadow copies ..................
Troubleshooting ...................................................................................................................... 160 Additional references for print services ....................................................................................... 160 C Microsoft Services for Network File System (MSNFS) ........................... 161 MSNFS Features .....................................................................................................................
BSMI notice ..................................................................................................................... Japanese notice ............................................................................................................... Korean notice A&B ........................................................................................................... Class A equipment .....................................................................................................
Figures 1 Internet options screen ............................................................................................. 25 2 HP StorageWorks 400r All-in-One Storage System front panel ...................................... 35 3 HP StorageWorks 400r All-in-One Storage system rear panel ....................................... 36 4 AiO400t front panel (bezel on) ................................................................................. 38 5 AiO400t front panel (bezel off) .......................
32 File and Print Services for NetWare dialog box ......................................................... 175 33 New User dialog box ............................................................................................ 176 34 NetWare Services tab ........................................................................................... 177 35 Automatic configuration settings .............................................................................. 181 36 Proxy server settings ................
Tables 1 Document conventions ............................................................................................. 15 2 Network access methods ......................................................................................... 19 3 Installation and Configuration checklist ...................................................................... 20 4 AiO Configurations .................................................................................................
33 Operating status: User-defined application properties ................................................ 102 34 Storage tab: User-defined application properties ....................................................... 102 35 Operating status: Data Protection properties ............................................................. 103 36 Storage tab: Shared folder properties ...................................................................... 104 37 Storage tab: Shared folder properties ...................
About this guide This guide provides information for setting up, configuring, and administering the HP StorageWorks All-in-One Storage Systems. • HP StorageWorks 400r All-in-One Storage System • HP StorageWorks 400t All-in-One Storage System • HP StorageWorks 600 All-in-One Storage System This guide is available on the HP web site and is also provided as a PDF document on the HP StorageWorks All-in-One Storage System documentation CD.
Convention Element • GUI elements that are clicked or selected, such as menu and list items, buttons, tabs, and check boxes Italic text Text emphasis • File and directory names • System output Monospace text • Code • Commands, their arguments, and argument values Monospace, italic Monospace, bold text text • Code variables • Command variables Emphasized monospace text WARNING! Indicates that failure to follow directions could result in bodily harm or death.
WARNING! To reduce the risk of personal injury or damage to equipment: • Extend leveling jacks to the floor. • Ensure that the full weight of the rack rests on the leveling jacks. • Install stabilizing feet on the rack. • In multiple-rack installations, fasten racks together securely. • Extend only one rack component at a time. Racks can become unstable if more than one component is extended. HP technical support For worldwide technical support information, see the HP support website: http://www.hp.
HP websites For additional information, see the following HP websites: • • • • • http://www.hp.com http://www.hp.com/go/storage http://www.hp.com/service_locator http://www.hp.com/support/manuals http://www.hp.com/support/downloads Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to storagedocsFeedback@hp.com. All submissions become the property of HP.
1 Installing and configuring the server Setup overview Your HP StorageWorks All-in-One Storage System comes preinstalled with the Windows® Storage Server™ 2003 R2 operating system. Windows Storage Server 2003 R2 extends the Windows Storage Server 2003 operating system, providing a more efficient way to manage and control access to local and remote resources.
Access method Remote management (Lights-Out 100 or Integrated Lights-Out 2) I.E. 5.5 or later required? Yes Storage system desktop accessible? Yes HP Rapid Startup Wizard access Indirectly from the storage system desktop. Notes See the HP ProLiant Lights-Out 100 Remote Management User Guide or HP Integrated Lights-Out 2 User Guide for server access instructions. NOTE: The AiO400t Storage System does not include embedded Lights-Out 100 remote management support.
3. Connect cables; (optional) connect a keyboard, mouse, and monitor; power on server; and log on to the server. See “Powering on the server” on page 22 and “Using the direct attach method” on page 23. 4. Access the All-in-One Management Console. See “Accessing the All-in-One Management Console” on page 23. 5. Complete the storage system configuration worksheet. See “Server configuration steps” on page 30. 6. Run Rapid Startup Wizard. See “Running the Rapid Startup Wizard” on page 32. 7.
NOTE: Depending on your system, the following components might also be included: • Bezel, bezel brackets, and screws • Slide rail assembly • Tower-to-rack conversion kit • HP ProLiant Essentials Integrated Lights-Out 2 Advanced Pack • HP ProLiant Essentials Lights-Out 100i Advanced Pack Powering on the server Power on the server after connecting the cables. For more information on your storage system model's hardware components, see “Server components” on page 35. 1.
AiO600 • Operating System Volume • DON'T ERASE Volume • RAID 5 • RAID 5 • Physical Drives 1–6 • Physical Drives 1–6 Default boot sequence The BIOS supports the following default boot sequence: 1. DVD-ROM 2. HDD 3. PXE (network boot) Under normal circumstances, the storage system boots up from the OS logical drive. • If the system experiences a drive failure, the drive displays an amber disk failure LED. • If a single drive failure occurs, it is transparent to the OS.
To connect the storage system to a network using the direct attach method 1. Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. The HP All-in-One Storage System Management Console and Rapid Startup Wizard start automatically. NOTE: You can change the administrator name and password when you configure the server using the Rapid Startup Wizard. See “Running the Rapid Startup Wizard” on page 32. 2.
1. On the remote client machine, open the Internet Explorer web browser and select Tools > Internet Options > Security. Figure 1 Internet options screen 2. On the Security screen, select Internet or Local intranet web content zone, then click Custom Level. 3. Scroll down to locate the ActiveX Controls and plug-ins settings. 4. At Download signed ActiveX controls settings, select Enable to enable ActiveX or Prompt to launch a notice requiring approval before ActiveX is enabled. 5.
3. Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. NOTE: You can change the administrator name and password when you configure the server using the “Running the Rapid Startup Wizard” on page 32. 4. To complete network configuration using the Rapid Startup Wizard, see “Configuring the server on the network” on page 30.
Logging off and disconnecting Remote Desktop provides two options when closing a client: you can either disconnect or log off the system. Disconnecting leaves the session running on the server. You can reconnect to the server and resume the session. If you are performing a task on the server, you can start the task and disconnect from the session. Later, you can log back on the server, re-enter the session, and either resume the task or check results.
Using remote management methods HP StorageWorks All-in-One Storage Systems provide remote management functionality through HP ProLiant Lights-Out technologies. The AiO400r Storage System includes a Lights-Out 100 (LO100) port with Advanced features. The AiO600 Storage System includes an Integrated Lights-Out 2 (iLO 2) port with Advanced features. The AiO400t Storage System does not include embedded Lights-Out 100 remote management support.
7. Access the HP All-in-One Storage System using the LO100 Remote Console functionality. Log on to the HP All-in-One Storage System with the default user name administrator and the password hpinvent. The HP All-in-One Storage System Management Console starts automatically. NOTE: When the Remote Console feature is enabled, you can get access to the storage system's login screen. The Lights-Out 100 port comes with factory default settings, which the administrator can change.
3. Using the methods described in the HP Integrated Lights–Out 2 User Guide, connect to the iLO 2 port. NOTE: To find the default iLO 2 log on settings, see the iLO 2 Default Network Settings card attached to your server. The default DNS, administrator name, and password needed to log on will be on this card. 4. If desired, you can change the default user name and password on the administrator account to your predefined selections. 5. Set up your user accounts, if using the local accounts feature. 6.
Configuration Steps User name Change system administrator's user name, which is set by default to administrator. User password Change system administrator's password, which is set by default to hpinvent. Alert E-mail Notification E-mail address alert sent to E-mail address for critical, warning, or informational messages about server status. E-mail address alert sent from Must be a valid, well-formed e-mail address that will appear as the sender of server status e-mail alerts.
Configuration Steps iLO 2 settings Change the host name, IP settings, and administrator settings. DNS server A Domain Name System (DNS) server name is required to provide for domain name to IP address resolution. WINS server A Windows Internet Naming Service (WINS) server name is required to determine the IP address associated with a particular network computer. Server Name Server name Assign a unique name to the storage system. This name identifies the storage system on the network.
• • • • interface controller (NIC) teams in a Windows-based operating system. These teams provide options for increasing fault tolerance and throughput. Activating iLO 2 Advanced features using a license key—The Remote Console feature of iLO 2 requires a license key. The key is included with the storage system inside the Country Kit. See the iLO 2 Advanced License Pack for activation instructions. Adjusting logging for system, application, and security events.
Installing and configuring the server
2 Storage system components This chapter provides illustrations of the AiO400r, AiO400t, and AiO600 Storage System hardware components. NOTE: Connecting the storage system power cord illuminates the LEDs on the front of the unit, the Systems Insight Display LED (if applicable), and the LEDs on the NIC connector (rear panel). The Lights-Out NIC LED (rear panel) illuminates if the Lights-Out port is connected.
Item Description Status 3 Serial number pull tab N/A 4 USB 2.
Item Description Status / Description 3 GbE LAN port for NIC 2 4 Captive thumbscrew for top cover N/A 5 Serial port N/A 6 Low profile/Half length expansion slot N/A 7 Full height/Full length expansion slot Populated with HP Smart Array E200 controller 8 T10/T15 Wrench N/A 9 Thumbscrew for PCI cage N/A 10 UID LED button 11 VGA port N/A 12 HP LO100i Management LAN Port Blinking green = Ongoing network activity 13 USB 2.
Figure 4 AiO400t front panel (bezel on) Table 8 AiO400t front panel components (bezel on) Item Description Status 1 DVD ROM drive N/A 2 2nd removable media drive bay cover N/A 3 Power button N/A 4 System power 5 HDD activity Green = Ongoing HDD activity 6 USB 2.
Figure 5 AiO400t front panel (bezel off) Table 9 AiO400t front panel components (bezel off) Item Description 1 DVD ROM drive 2 2nd removable media drive bay EMI shield 3—6 Hard disk drives 1–4 behind EMI shield Figure 6 AiO400t rear panel Table 10 AiO400t rear panel components Item Description Status / Description 1 Kensington lock notch N/A All-in-One Storage System 39
Item Description Status / Description 2 Access panel thumbscrew N/A 3 System fan N/A 4 Cable lock provision notch N/A 5 PCI slot cover retainer N/A 6 PCI slot cover retainer thumbscrew N/A 7 PCI slot covers One slot populated with HP Smart Array E200 controller 8 Lights-Out remote management port (optional) Management NIC activity and link Blinking green = Ongoing network activity Green = Existing network link Embedded NIC link and activity 9 Embedded NIC port (RJ-45) Orange = 10/10
1 2 3 9 4 5 10 6 7 8 1 2 3 4 5 6 11 15750 Figure 7 HP StorageWorks 600 All-in-One Storage System front panel Table 11 HP StorageWorks 600 All-in-One front panel components Item Description Status 1 Power on/Standby button N/A Green = Power on 2 Power LED Amber = System shut down, but power still applied Off = No power Green = Normal 3 Internal health LED Amber = System health is degraded Red = System health is critical Off = Normal (when in standby mode) Green = Normal 4 External health
1 2 7 3 8 4 9 10 5 11 6 15 16 12 13 14 17 18 15751 Figure 8 HP StorageWorks 600 All-in-One Storage System rear panel Table 12 HP StorageWorks 600 All-in-One Storage System rear panel components Item Description Status 1 Power Supply LED 2 Power cord connector N/A 3 Keyboard connector N/A 4 Mouse connector N/A Green = Power supply is on and functioning Off = No power or inadequate power supply Blue = Activated 5 UID LED and button Flashing blue = Remote inquiry Off = Deactivated
Item Description Status Off = Not linked to network 17 10/100/1000 NIC activity LED 18 10/100/1000 NIC link LED Green or flashing = Network activity Off = No network activity Green = Linked to network Off = Not linked to network SAS and SATA hard drive LEDs The following figure shows SAS/SATA hard drive LEDs. These LEDs are located on all HP All-in-One hot plug hard drives. Figure 9 SAS/SATA hard drive LEDs Table 13 SAS and SATA hard drive LED combinations 1. Fault/UID LED (amber/blue) 2.
1. Fault/UID LED (amber/blue) 2. Online/activity LED (green) Status drive. To minimize the risk of data loss, do not replace the drive until the expansion or migration is complete. Off Flashing regularly (1 Hz) Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding, or it is part of an array that is undergoing capacity expansion or stripe migration.
3 Storage management overview This chapter provides an overview of some of the components that make up the storage structure of the HP All-in-One Storage System. Storage management elements Storage is divided into four major divisions: • • • • Physical storage elements Logical storage elements File system elements File sharing elements Each of these elements is composed of the previous level's elements.
Physical Disks Single Server RAID Arrays Storage Elements Logical Drives Selective Storage Presentaion Visible Disks Logical Storage Elements Partitioning NTFS Volumes Q: File System Elements Shadow Copy Elements File Folders Shadow Copies (Snapshots) \Engineering \Marketing \Users \Sales Q: from 02/10/03 09:30 \snapshot.0 Q: from 02/10/03 11:30 \snapshot.
• Include the appropriate number of physical drives in the arrays to create logical storage elements of desired sizes. Arrays See Figure 11. With an array controller installed in the system, the capacity of several physical drives (P1–P3) can be logically combined into one or more logical units (L1) called arrays. When this is done, the read/write heads of all the constituent physical drives are active simultaneously, dramatically reducing the overall time required for data transfer.
Fault tolerance Drive failure, although rare, is potentially catastrophic. For example, using simple striping as shown in Figure 12, failure of any hard drive leads to failure of all logical drives in the same array, and hence to data loss. To protect against data loss from hard drive failure, storage systems should be configured with fault tolerance. HP recommends adhering to RAID 5 configurations.
It is important to note that a LUN may extend over (span) all physical drives within a storage controller subsystem, but cannot span multiple storage controller subsystems. A1 A2 L3 L1 L4 L2 L5 gl0045 Figure 13 Two arrays (A1, A2) and five logical drives (L1 through L5) spread over five physical drives NOTE: This type of configuration may not apply to all storage systems and serves only as an example. Through the use of basic disks, primary partitions or extended partitions can be created.
is important. The same performance characteristics on numbers of reads and writes apply when using fault-tolerant configurations, as is the case with controller-based RAID. These volumes can also be assigned drive letters or be mounted as mount points off existing drive letters. The administrator should carefully consider how the volumes will be carved up and what groups or applications will be using them.
Using storage elements The last step in creating the element is determining its drive letter or mount point and formatting the element. Each element created can exist as a drive letter, assuming one is available and/or as mount points off of an existing folder or drive letter. Either method is supported. However, mount points can not be used for shares that will be shared using Microsoft Network File Services.
All-in-One Storage Manager HP StorageWorks All-in-One Storage Manager (ASM) is a storage hosting and management tool that radically simplifies: • • • • Hosting storage for applications and shared folders, page 61 Data protection, page 81 Managing storage, page 89 Monitoring storage, page 93 ASM provides storage-allocation wizards that walk you through the process of allocating and configuring storage on your HP All-in-One Storage System to host application data and shared folders.
Microsoft iSCSI Target and Data Protector Express are required to host application storage and create backups using ASM. Microsoft iSCSI Target and Data Protector Express come preinstalled on your HP All-in-One Storage System. A license key is not required for Microsoft iSCSI Target. Your license key for Data Protector Express comes preinstalled on your HP All-in-One Storage System.
Figure 14 Application storage infrastructure NOTE: The iSCSI communication path is transparent to the application, application server, and Windows Explorer. The application, application server, and Windows Explorer believe the data is stored on the application server. So, to view the application data, you must navigate to the iSCSI LUN(s) on the application server, not the LUN(s) on your HP All-in-One Storage System, using Windows Explorer. ASM provides automated data migration for Exchange and SQL Server.
Figure 15 Shared folder storage infrastructure ASM discovers any top-level and nested shared folders on your HP All-in-One Storage System during setup and afterwards on an ongoing basis. ASM allows you to monitor and manage any top-level shared folders created on your HP All-in-One Storage System using ASM or other applications, such as Windows Explorer or the Shared Folder MMC snap-in.
About the user interface 1 Menu bar 4 Content pane 2 Toolbar 5 Actions pane 3 Navigation pane 6 Status bar Figure 16 ASM main window Menu bar The menu bar, located at the top of the ASM main window, is the Microsoft Management Console (MMC) menu bar. See the MMC online help for more information. To open MMC online help, click Help in the Actions pane. Toolbar The toolbar, located just below the menu bar in the ASM main window, is the MMC toolbar. See the MMC online help for more information.
pane. See “Monitoring storage” on page 93 for more information on views and information displayed in the content pane. Filters drop-down menu Select an application from the Filters drop-down menu, located at the top of the content pane, to view information for only that application in the content pane. Select All from the Filters drop-down menu to view information for all applications and shared folders in the content pane.
Menu Description Any one of the following items: • Host an Exchange Storage Group • Create a Shared Folder Opens a storage-allocation wizard that helps you allocate and configure storage space on your HP All-in-One Storage System. • Host a SQL Server Database • Host a User-Defined Application View > Customize This is an MMC command. See the Microsoft Management Console online help. To open MMC online help, click Help in the Actions pane. Help Opens online help for ASM.
3. Select an item in the Items list and a color in the Color drop-down menu. 4. When your color selections are complete, click Apply to apply the color settings to the content pane. 5. Click OK. Scaling display settings Changing the scaling settings customizes the size at which each application area or shared folder is displayed in the content pane.
Storage management overview
4 Hosting storage for applications and shared folders The All-in-One Storage Manager (ASM) radically simplifies hosting application storage and shared folders on your HP All-in-One Storage System, using storage-allocation wizards. Use storage-allocation wizards to allocate and configure storage for these applications: Application Description Notes Exchange Allocate and configure storage for one or more Exchange storage group components.
Application Description Notes System. A wizard assists you in allocating and configuring storage space. The wizard does not migrate user-defined application data to your HP All-in-One Storage System or reconfigure the application to store data on your HP All-in-One Storage System. You must do this manually as described in “Migrating user-defined application data from a remote application” on page 80, and as described in the application's documentation.
2. Click Next to open the Select Storage Group Components page (see “Selecting Exchange Server storage group components” on page 63). Selecting Exchange storage group components Use the Select Storage Group Components page to select the Exchange storage group and storage group components (mail stores, public stores, and logs) you want to host on your HP All-in-One Storage System and manage using ASM. 1.
Using the Create a Shared Folder Wizard The Create a Shared Folder Wizard walks you through the process of creating a top-level shared folder (file share) on your HP All-in-One Storage System, including allocating and configuring the required storage. NOTE: You cannot create nested shared folders on your HP All-in-One Storage System using ASM. You may use other applications, such as Windows Explorer or the Shared Folder MMC snap-in, to create nested shared folders on your HP All-in-One Storage System.
2. Click Next to open the Storage Allocation page (see “Allocating space for components” on page 69). Using the Host a SQL Server Database Wizard The Host a SQL Server Database Wizard automatically discovers the servers that host SQL Server and SQL Server databases on your domain, and helps you allocate and configure storage space for each database component you select: • Data file—Contains pointers to database files, storage for system tables and objects, and storage for database data and objects.
1. Do one of the following: • Select all components (including all of its components) by checking the box next to the component. • Select individual database components by expanding the list and checking the boxes next to the components. You must select all the database components, including the log file, in a database if you want to run backups and/or take snapshots of the database using ASM. NOTE: ASM cannot migrate system databases; for example, ASM cannot migrate master, model, msdb and tempdb.
1. 2. Do one of the following: • Select Transaction processing (TP) for frequently updated, fast growing databases with large volumes of data requiring concurrent user access. • Select Decision support systems (DSS) for databases designed to handle queries on large amounts of data, typically used for data-mining applications. When you are done, click Next to open the Storage Allocation page (see “Allocating space for components” on page 69).
Choose type of application 1. Select the type of application for hosting a user-defined application: • Remote Windows Application- ASM will provision storage for the application and expose the storage to the given server as an NTFS volume over the iSCSI protocol. This is the recommended option for most scenarios. The All-in-One Storage Manager agent must be installed on the application server to use this option. • iSCSI LUN- Exposes a LUN to the remote server so the server can store data on the LUN.
3. When you are done, click Next to open the Storage Allocation page (see “Allocating space for components” on page 69). NOTE: The number of slots needed for your virtual library will depend on the media rotation type chosen for the backups that will use the virtual library. The number of slots must be high enough to support the rotation type you intend to use for scheduling backups to this virtual library.
1. Application components, user-defined application, or shared folder name 4. Minimum and maximum storage space that can be allocated to each application component, user-defined application, or shared folder listed 2. Specify size of storage space to allocate to each application component, user-defined application, or shared folder listed 5. Reset all values to defaults 3. Specify the storage RAID level for each application component, user-defined application, or shared folder listed 6.
1. Do one of the following: • Click Next to accept the default values that ASM has provided for the components, user-defined application, or shared folder selected. • Change the default size values: • Select a row to edit. • Highlight the storage size unit value and then enter a new value as necessary: megabytes (MB), gigabytes (GB), or terabytes (TB). • Highlight the storage size number value and enter a new value, or click the arrow buttons to change the value.
Table 19 provides a brief description of the items you can modify: Table 19 Advanced window items Item Description Notes You are prevented from setting the size below 15 MB. After the allocated storage space is full (100 percent used), no further data can be stored to the space until you increase the size using the Allocate Space Wizard. The only exception is for shared folders and local storage applications without an enforced allocated limit.
Item Hot Spare Required Physical Disk Type Description Notes application. When the storage space allocated to a component is full, no further data can be saved to this component. allocated storage limit for shared folders and local storage applications on page 75. A hot spare is a hard drive reserved as a spare for storage space configured as RAID 1, 1+0, 5, or 6. A hot spare automatically replaces a hard drive when it fails.
RAID level Description that holds the data fails. However, because no logical drive capacity is used for redundant data, this method offers the best capacity. This method offers the best processing speed by reading two stripes on different hard drives at the same time and by not having a parity drive. RAID 1 – Mirroring Offers a good combination of data protection and performance. RAID 1 or drive mirroring creates fault tolerance by storing duplicate sets of data on a minimum of two hard drives.
After you set a warning threshold, ASM changes the status indicator for the application component, user-defined application, or shared folder when this threshold has been surpassed. This is a warning only; no hard limits are enforced on storage capacity as a result of setting this value. The warning is visible in these places: • A yellow warning icon appears on the application component, user-defined application, or shared folder icon in the content pane. • As an alert in the Properties window.
Selecting data protection Use the Data Protection window in the wizard to select the following: • Local disk backup- Previous versions of data are retained on disk using virtual library backups and/or volume snapshots for fast recovery. • Alternate location backup— Data is copied off of this All-in-One Storage System to tape, other disks, or other types of storage media. This enables long term storage and disaster recovery.
Scheduling backups 1. On the Data Protection page in any wizard, select Modify Advanced Properties. This will open the Data Protection Advanced Properties window. NOTE: You are also able to get to the Data Protection Advanced Properties window by selecting the Data Protection action on the selected component after you have completed the wizard. See Selecting local or alternate backup for more information on how to navigate to the Data Protection page outside of a wizard. 2.
Scheduling snapshots 1. On the Data Protection page in any wizard, select Modify Advanced Properties. This will open the Data Protection Advanced Properties window. NOTE: You are also able to get to the Data Protection Advanced Properties window by selecting Data Protection after you have scheduled backups. See Selecting local or alternate backup for more information on how to navigate to the Data Protection page outside of a wizard. 2.
Monitoring task completion status The Task Viewer shows the status of ASM wizard tasks. ASM wizard tasks allocate and configure storage, host application storage and shared folders, and configure data protection. NOTE: Click the Expand tree icon next to a task to view its subtasks. Select a task to view its description in the Details box on the Task Viewer. The Task Viewer has a filter drop-down menu.
Migrating user-defined application data from a remote application The Host an Exchange Storage Group Wizard and Host a SQL Server Database Wizard automatically migrate application data from the application server to your HP All-in-One Storage System. The Host a User-Defined Application Wizard, however, does not migrate data for a user-defined application from the application server to your HP All-in-One Storage System. You must do this manually. 1.
5 Data protection The Data protection window allows for the following: • Select how data protection is configured, using local disk-to-disk (Local D2D) and/or Alternate Location Backup (D2Any) of an Exchange storage group, SQL Server database, user-defined application, or shared folder. • Select a media rotation type for backups or run a backup of an Exchange storage group, SQL Server database, user-defined application, or shared folder. See “Scheduling and running backups” on page 84.
1. Do one of the following: 2. • Select an Exchange storage group in the content pane to schedule backups of the Exchange storage group. • Select a SQL Server database in the content pane to schedule backups of the SQL Server database. • Select a user-defined application in the content pane to schedule backups of the user-defined application. • Select a shared folder in the content pane to schedule backups of the shared folder. Do one of the following: 3. • In the Actions pane, click Data Protection.
2. To delete a snapshot, select the snapshot from the snapshot list and click Delete. 3. When you are done making changes, click OK. Exposing a snapshot You can view a read-only copy of a snapshot of an Exchange storage group, SQL Server database, or user-defined application by exposing the snapshot on your HP All-in-One Storage System. Exposing a snapshot allows you to view the contents of a snapshot and selectively revert files. NOTE: A snapshot of a shared folder cannot be exposed using ASM.
1. In the Manage Backups and Snapshots page, select a snapshot from the list. NOTE: To view the contents of a snapshot, expose it. See “Exposing a snapshot” on page 83 for more information. 2. Click Revert. 3. Click Yes to confirm. Scheduling and running backups • To schedule backups, see Scheduling backups on page 77 for more information.
Selecting the restore destination 1. Do one of the following: 2. • Select Overwrite Restore to overwrite the existing data with the backup. • Select Different Location Restore to save the backup to a different location, and then enter the location (path) where you want the backup saved on your HP All-in-One Storage System. To browse for the location, click Browse. Click Next to open the Launch DPX page (see Launching DPX). Launching DPX 1.
1. Use the Command Line interface (CLI) found at C:\Program Files\HP\HP All-in-One Storage Manager\hpkacli.exe. The password may be set interactively, allowing the password characters to be masked, or it may be set with a single command. 2. Use the following command to display usage details: > hpkacli /? To specify a password 1. Type the following: > hpkacli set password 2.
The All-in-One storage system provides an ISO image at c:\hpnas\components\dpx\iso that may be used to install Data Protector Express on Windows or Linux. You can burn a CD or DVD from the ISO image, or mount the image on a file system using various available tools. As an alternative, you may also download and install Data Protector Express from http://www.hp.com 1. 2. When installing Data Protector Express on another machine, select Join an existing Data Protector Express domain.
Data protection
6 Managing storage After an application is hosted or shared folder is created on your HP All-in-One Storage System using a storage-allocation wizard, you can manage its storage and data by: • • • • • Increasing or reducing the allocated storage, page 89 Changing the percent full warning threshold, page 90 Removing application areas from view, page 91 Changing permissions, names, descriptions, or paths of shared folders, page 91 Deleting shared folders, page 92 Increasing or reducing the allocated storage
3. Change the size value: • Highlight the storage size unit value and then enter a new value as necessary: megabytes (MB), gigabytes (GB), or terabytes (TB). • Highlight the storage size number value and enter a new value, or click the arrow buttons to change the value. The Size Range column shows the minimum and maximum storage space that can be allocated to an application component, user-defined application, or shared folder.
Removing application areas from view You can remove application components and user-defined applications from view on the ASM user interface. This allows you to remove storage information from the content pane pertaining to storage allocations lost due to hard drive failure or storage for an application component or user-defined application whose storage you plan to unhost. Removing an application component or user-defined application from view does not unhost its storage.
You will need to know the path of a shared folder to change its permissions, name, description, or path. To find the path, select the shared folder in the content pane and then click Properties in the Actions pane. The share path listed on the General tab is the path for the shared folder. Deleting shared folders ASM cannot be used to delete top-level or nested shared folders that reside on your HP All-in-One Storage System.
7 Monitoring storage ASM provides storage-management functions so you can quickly view used and allocated storage, and percent full warning thresholds settings for application and shared folder storage on your HP All-in-One Storage System.
Accessing application and shared folder properties When Application View is selected in the Actions pane, you can view the storage status, alerts, and properties for the following: • • • • • Applications Application component User-defined applications Shared folders pool Shared folders Do one of the following: • Select the item in the content pane and then click Properties in the Actions pane. • Right-click the item in the content pane and select Properties.
• General tab—(Exchange, Exchange storage groups, and components) Displays the name of the application, the total capacity reserved for the application, and its operating status: Table 21 Operating status: Exchange properties Status indicator Value OK Exchange is running and storage is online. No alerts. Warning See the Alerts list for more information. See Table 45 on page 113 for alert descriptions. Critical See the Alerts list for more information. See Table 45 on page 113 for alert descriptions.
Property Value Protocol Communication protocol used to transfer data between the server that hosts Exchange (and the storage group component) and your HP All-in-One Storage System. Application Server Host Name Name of server that hosts Exchange and the storage group component. Application Server Volume Name Name of the volume on the server that hosts Exchange to which Exchange saves the storage group component's data.
Value Description Streaming Database File (Exchange 2003 only) Path to the file that stores Internet-formatted messages, such as native Multipurpose Internet Extensions (MIME) content. Replication type Indicates if LCR is being used. LCR Status Indicate Exchange warnings for LCR. LCR Copy Copy of the active/original exchange component.
Value Description LCR System Folder Copy Path to LCR system file copies Accessing properties for shared folders ASM provides properties information for shared folders pool and for any shared folder on your HP All-in-One Storage System. Using properties information, you can determine details about shared-folder status, including allocated space, and nested shares (if any), whether shared-folder storage is online or offline, and any warning or critical status indicators. 1.
Property Value Storage Server Volume - RAID Stripe Size The RAID stripe size to which the shared folder's storage is configured. See Table 19 on page 72 for more information. Storage Server Volume - Read Cache Speeds up reads when enabled. This setting is determined by the storage array, not ASM. Storage Server Volume - Write Cache Speeds up writes when enabled. This setting is determined by the storage array, not ASM.
• General tab—(SQL Server, SQL Server database, SQL Server database component) Displays the name of the application, the total capacity reserved for the application, and its operating status: Table 29 Operating status: SQL Server properties Status indicator Value OK SQL Server is running and storage is online. No alerts. Warning See the Alerts list for more information. See Table 45 on page 113 for alert descriptions. Critical See the Alerts list for more information.
Property Value Application Server Volume - Mount Paths Path the volume is mounted on, on the server that hosts SQL Server. The volume is built on the iSCSI LUN exported by ASM to the server that hosts SQL Server. • Warning Threshold tab—(SQL Server database component) Allows you to change the percent full warning threshold value for the database component. See Setting a percent full warning threshold on page 74 for more information.
3. To select properties for the user-defined application pool: • Select User-Defined in the content pane and then click Properties in the Actions pane. or • Right-click User-Defined in the content pane and select Properties. For a user-defined application: • Select any user-defined application in the content pane and then click Properties in the Actions pane. or • Right-click any user-defined application in the content pane and select Properties.
Property Value Application Server Volume - RAID Level The RAID level to which the user-defined application storage is configured. See Customizing RAID levels on page 73 for more information. Application Server Volume - RAID Stripe Size The RAID stripe size to which the user-defined application storage is configured. See Table 19 on page 72 for more information. Application Server Volume - Read Cache Speeds up reads when enabled. This setting is determined by the storage array, not ASM.
Property Value Storage Server Volume - Name Name of the volume on your HP All-in-One Storage System where the shared folder is stored. Storage Server Volume - Status Status of the volume that holds the shared folder on your HP All-in-One Storage System. Storage Server Volume - Exclusive Storage Indicates if shared folder's storage is configured with exclusive storage. See Table 19 on page 72 for more information.
Property Value Storage Server Volume - Mount Paths Path to where the volume that holds the virtual library on your HP All-in-One Storage System is mounted.
Accessing storage area properties When Storage View is selected in the Actions pane, you can view the storage status, alerts, and properties for the following storage areas on your HP All-in-One Storage System: • Volumes • Logical disks Do one of the following: • Select the item in the content pane and then click Properties in the Actions pane. • Right-click the item in the content pane and select Properties.
Storage tab—Displays the unallocated space, used space, free space on the volume, and also details on your volume or logical disk properties, depending on the application open: Table 40 Storage tab: HP All-in-One Storage System logical disk properties Property Value System Name Name the system uses to identify the logical disk. Physical Disks Globally unique identifier(s) of the hard drive(s) used by the logical disk for storage.
Property Value Storage Server Volume - Mount Paths Path on which the volume on your HP All-in-One Storage System is mounted. • Warning Threshold tab—Allows you to change the percent full warning threshold value for the user-defined application. • Data Protection tab—Allows you to schedule backups or run a backup of the user-defined application data, or restore the user-defined application data from a backup.
1. In the Actions pane, select Application Server View. 2. Do one of the following: 3. • Select an application server volume in the content pane and then click Properties in the Actions pane. • Right-click an application server volume in the content pane and select Properties.
Storage Utilization View Storage Utilization View displays the allocated storage values for specific applications and the shared folders pool, the unallocated storage value, and the storage value for data not managed by ASM in a pie chart. • In the Actions pane, select Storage Utilization View.
8 Troubleshooting, servicing, and maintenance Troubleshooting the storage system Use the references and general guidelines in this section to troubleshoot your HP StorageWorks All-in-One Storage System. Operating system problems and resolutions Use the suggestions below to help resolve operating system issues. Table 44 Operating system problems Problem Action Operating system locks up Scan for viruses with an updated virus scan utility. General protection fault (GPF) occurs.
3. Install the current drivers. Application software problems If your application software locks up, perform the following actions: • • • • • Check the application log and operating system log for entries indicating why the software failed. Check for incompatibility with other software on the server. Check the support web site of the software vendor for known problems. Review the log files for changes made to the server that may have caused the problem.
Figure 18 Example of alert To view alerts: • Select an item in the Content pane and click Properties in the Actions pane to view the alerts for the item selected. Storage status is displayed as an icon when the storage status is Warning or Critical: • In the Content pane on application, application component, or logical disk icons. • In the Properties window on the General tab. NOTE: ASM rolls up any status alert to the highest level.
Object Alert text Possible cause Solution An alert will be issued for the logical disk if it has failed. increase the allocated storage (see “Increasing or reducing the allocated storage” on page 89).If the logical disk has failed, see “Recovering from logical disk failure” on page 117. Directory path cannot be found. Allocated storage space cannot be located. Volume is intact. Path assigned to allocated storage has been changed or the logical disk has failed.
Object Alert text Description Possible cause Solution Exchange MailStore This MailStore is offline. Status of mail store is offline. Administrator has placed mail store offline. Return mail store to online. Exchange PublicStore This PublicStore is offline. Status of public store is offline. Administrator has placed public store offline. Return public store to online. SQL Server Database This database is not in a functional state. Database is offline.
Object Alert text Description Possible cause Solution Health: Failing but still working A hard drive is failing but still working. Hard drive is failing. Replace failing hard drive now (optional) or replace hard drive after it fails. Health: Failing redundancy but one mirror still working Logical disk is configured as RAID 1 or RAID 1+0(10). One of the pair of mirrored hard drives is failing but the other hard drive is still working. Hard drive is failing.
Object Alert text Description Possible cause Solution Status: Not ready Logical disk not usable while an operation is being performed. Operation is being performed that prevents logical disk from being used. No action is required. Status: Offline Logical disk is not usable. Administrator has taken logical disk offline. Return the logical disk to online. Status: Failed Logical disk is not usable. Hardware failure has occurred. See array controller documentation for more information.
Storage system documentation Storage system documentation is the set of documents provided with a storage system. Most storage system documents are available as a PDF file or a link on the documentation CD. Storage system documentation can be accessed from http://www.hp.com/support/manuals). Under the storage section, click Disk Storage Systems and then select your product. Additional documentation can also be found on the inside of the access panel of certain system models.
To install WEBES on your storage system, run the setup executable located in the C:\hpnas\Components\WEBES folder. Certificate of Authenticity The Certificate of Authenticity (COA) label is used to: • Upgrade the factory-installed operating system using the Microsoft Upgrade program for license validation. • Reinstall the operating system because of a failure that has permanently disabled it. The COA label location varies by server model.
Troubleshooting, servicing, and maintenance
9 System recovery This chapter describes how to use the Recovery DVD that is provided with your All-in-One Storage System. The System Recovery DVD The HP StorageWorks All-in-One Storage System Recovery DVD that is provided with your storage system allows you to install an image or recover from a catastrophic failure. You may boot from the DVD and restore the system to the factory condition at any time. This allows you to recover the system if all other means to boot the system fails.
System recovery
A File server management This chapter begins by identifying new or improved file services in Windows Storage Server 2003 R2. The remainder of the chapter describes the many tasks and utilities that play a role in file server management. New or improved file services features in Windows Storage Server 2003 R2 Storage Manager for SANs The Storage Manager for SANs (also called Simple SAN) snap-in enables you to create and manage the LUNs that are used to allocate space on storage arrays.
Search enhancements The Indexing service is tuned for additional indexing and query performance. Prior to the R2 release, if the Indexing service on a Windows Storage Server was not entirely up-to-date, the client-side search engine needed to “walk through” all the files within the scope of the search on the server. With the performance tuning in R2, the Indexing service no longer needs to be entirely up-to-date.
• Sessions • Open Files File services management Configurable and pre-configured storage Certain storage systems ship with storage configured only for the operating system. The administrator must configure data storage for the storage system. Other storage systems ship with pre-configured storage for data. Depending on the type of storage system purchased, additional storage configuration is required. Configuring additional storage involves creating arrays, logical disks, and volumes.
NOTE: Do not tamper with the “DON’T ERASE” or local C: volume. These are reserved volumes and must be maintained as they exist. Storage management utilities The storage management utilities pre-installed on the storage system include the HP Array Configuration Utility (ACU). Array management utilities Storage devices for RAID arrays and LUNs are created and managed using the array management utilities mentioned previously. For HP Smart Arrays use the ACU.
3. Click Array Configuration Utility on the left side of the window. The ACU opens and identifies the controllers that are connected to the system. Some ACU guidelines to consider: • Do not modify the first two logical drives of the storage system; they are configured for the storage system operating system. • Spanning more than 14 disks with a RAID 5 volume is not recommended. • Designate spares for RAID sets to provide greater protection against failures. • RAID sets cannot span controllers.
• Basic disks can contain up to four primary partitions (or three primary partitions and one extended partition). • Format drives with a 16 K allocation size for best support of shadow copies, performance, and defragmentation. • NTFS formatted drives are recommended, because they provide the greatest level of support for shadow copies, encryption, and compression. • Only basic disks can be formatted as FAT or FAT32. • Read the online Disk Management help found in the utility.
When enabling disk quotas, it is possible to set both the disk quota limit and the disk quota warning level. The disk quota limit specifies the amount of disk space a user is allowed to use. The warning level specifies the point at which a user is nearing his or her quota limit. For example, a user's disk quota limit can be set to 50 megabytes (MB), and the disk quota warning level to 45 MB. In this case, the user can store no more than 50 MB on the volume.
Extending storage using Windows Storage Utilities Volume extension grows the storage space of a logical drive. During this process, the administrator adds new storage space to an existing logical drive on the same array, usually after the array has been expanded. An administrator may have gained this new storage space by either expansion or by deleting another logical drive on the same array. Unlike drive expansion, the operating system must be aware of changes to the logical drive size.
Volume shadow copies The Volume Shadow Copy Service provides an infrastructure for creating point-in-time snapshots (shadow copies) of volumes. Shadow Copy supports 64 shadow copies per volume. A shadow copy contains previous versions of the files or folders contained on a volume at a specific point in time.
Shadow copies are designed for volumes that store user data such as home directories and My Documents folders that are redirected by using Group Policy or other shared folders in which users store data. Shadow copies work with compressed or encrypted files and retain whatever permissions were set on the files when the shadow copies were taken.
Identifying the storage area To store the shadow copies of another volume on the same file server, a volume can be dedicated on separate disks. For example, if user files are stored on H:\, another volume such as S:\ can be used to store the shadow copies. Using a separate volume on separate disks provides better performance and is recommended for heavily used storage systems.
Mounted drives A mounted drive is a local volume attached to an empty folder (called a mount point) on an NTFS volume. When enabling shadow copies on a volume that contains mounted drives, the mounted drives are not included when shadow copies are taken. In addition, if a mounted drive is shared and shadow copies are enabled on it, users cannot access the shadow copies if they traverse from the host volume (where the mount point is stored) to the mounted drive.
F: G: H: cache file cache file cache file Figure 20 Shadow copies stored on a source volume The cache file location can be altered to reside on a dedicated volume separate from the volumes containing files shares. (See Figure 21). F: G: H: L: cache file cache file cache file Figure 21 Shadow copies stored on a separate volume The main advantage to storing shadow copies on a separate volume is ease of management and performance.
CAUTION: If the data on the separate volume L: is lost, the shadow copies cannot be recovered. Enabling and creating shadow copies Enabling shadow copies on a volume automatically results in several actions: • Creates a shadow copy of the selected volume. • Sets the maximum storage space for the shadow copies. • Schedules shadow copies to be made at 7 a.m. and 12 noon on weekdays. NOTE: Creating a shadow copy only makes one copy of the volume; it does not create a schedule.
NOTE: When deleting a shadow copy schedule, that action has no effect on existing shadow copies. Viewing shadow copy properties The Shadow Copy Properties page lists the number of copies, the date and time the most recent shadow copy was made, and the maximum size setting. NOTE: For volumes where shadow copies do not exist currently, it is possible to change the location of the cache file. Managing the cache files on a separate disk is recommended.
9. On the Shadow Copies tab, ensure that the volume is selected, and then click Enable. Shadow copies are now scheduled to be made on the alternate volume. Disabling shadow copies When shadow copies are disabled on a volume, all existing shadow copies on the volume are deleted as well as the schedule for making new shadow copies. CAUTION: When the Shadow Copies Service is disabled, all shadow copies on the selected volumes are deleted. Once deleted, shadow copies cannot be restored.
4. Click the Shadow Copies tab. See Figure 22. Figure 22 Accessing shadow copies from My Computer Shadow Copies for Shared Folders Shadow copies are accessed over the network by supported clients and protocols. There are two sets of supported protocols, SMB and NFS. All other protocols are not supported; this would include HTTP, FTP, AppleTalk, and NetWare Shares. For SMB support, a client-side application denoted as Shadow Copies for Shared Folders is required.
SMB shadow copies Windows users can independently access previous versions of files stored on SMB shares by using the Shadow Copies for Shared Folders client. After the Shadow Copies for Shared Folders client is installed on the user's computer, the user can access shadow copies for a share by right-clicking on the share to open its Properties window, clicking the Previous Versions tab, and then selecting the desired shadow copy. Users can view, copy, and restore all available shadow copies.
NFS shadow copies UNIX users can independently access previous versions of files stored on NFS shares via the NFS client; no additional software is required. Server for NFS exposes each of a share's available shadow copies as a pseudo-subdirectory of the share. Each of these pseudo-subdirectories is displayed in exactly the same way as a regular subdirectory is displayed. The name of each pseudo-subdirectory reflects the creation time of the shadow copy, using the format .@GMT-YYYY.MM.DD-HH:MM:SS.
6. Click Restore to restore the file or folder to its original location. Click Copy... to allow the placement of the file or folder to a new location. Figure 24 Recovering a deleted file or folder Recovering an overwritten or corrupted file Recovering an overwritten or corrupted file is easier than recovering a deleted file because the file itself can be right-clicked instead of the folder. To recover an overwritten or corrupted file: 1.
3. Click either Copy... or Restore. Clicking Restore enables the user to recover everything in that folder as well as all subfolders. Clicking Restore does not delete any files. Backup and shadow copies Shadow copies are only available on the network via the client application, and only at a file or folder level as opposed to the entire volume. Hence, the standard backup associated with a volume backup will not work to back up the previous versions of the file system.
The data is now ready to use. Folder and share management The HP All-in-One Storage System supports several file-sharing protocols, including DFS, NFS, FTP, HTTP, and Microsoft SMB. This section discusses overview information as well as procedures for the setup and management of the file shares for the supported protocols. Security at the file level and at the share level is also discussed.
2. Click Properties, and then click the Security tab. Figure 25 Properties dialog box, Security tab Several options are available on the Security tab: • To add users and groups to the permissions list, click Add. Follow the dialog box instructions. • To remove users and groups from the permissions list, highlight the desired user or group, and then click Remove. • The center section of the Security tab lists permission levels.
3. To modify ownership of files, or to modify individual file access level permissions, click Advanced. Figure 26 illustrates the properties available on the Advanced Security Settings dialog box. Figure 26 Advanced Security settings dialog box, Permissions tab Other functionality available in the Advanced Security Settings dialog box is illustrated in Figure 26 and includes: • Add a new user or group—Click Add, and then follow the dialog box instructions. • Remove a user or group— Click Remove.
4. Enable or disable permissions by selecting the Allow box to enable permission or the Deny box to disable permission. If neither box is selected, permission is automatically disabled. Figure 27 illustrates the Edit screen and some of the permissions. Figure 27 User or group Permission Entry dialog box Another area of the Advanced Security Settings is the Auditing tab. Auditing allows you to set rules for the auditing of access, or attempted access, to files or folders.
Figure 28 Advanced Security Settings dialog box, Auditing tab 5. Click Add to display the Select User or Group dialog box. Figure 29 Select User or Group dialog box NOTE: Click Advanced to search for users or groups. 6. 148 Select the user or group.
7. Click OK. The Auditing Entry dialog box is displayed. Figure 30 Auditing Entry dialog box for folder name NTFS Test 8. Select the desired Successful and Failed audits for the user or group. 9. Click OK. NOTE: Auditing must be enabled to configure this information. Use the local Computer Policy Editor to configure the audit policy on the storage system. The Owner tab allows taking ownership of files.
Figure 31 Advanced Security Settings dialog box, Owner tab The current owner of the file or folder is listed at the top of the screen. To take ownership: 1. Click the appropriate user or group in the Change owner to list. 2. If it is also necessary to take ownership of subfolders and files, enable the Replace owner on subcontainers and objects box. 3. Click OK. Share management There are several ways to set up and manage shares.
By keeping the number of shares and other resources low, the performance of the storage system is optimized. For example, instead of sharing out each individual user's home directory as its own share, share out the top-level directory and let the users map personal drives to their own subdirectory. Defining Access Control Lists The Access Control List (ACL) contains the information that dictates which users and groups have access to a share, as well as the type of access that is permitted.
Managing shares Shares can be managed using the HP All-in-One Management Console. Tasks include: • • • • Creating a new share Deleting a share Modifying share properties Publishing in DFS CAUTION: Before deleting a share, warn all users to exit that share and confirm that no one is using that share. File Server Resource Manager File Server Resource Manager (FSRM) is a suite of tools that allows administrators to understand, control, and manage the quantity and type of data stored on their servers.
Storage reports On the Storage Reports node of the File Server Resource Manager snap-in, you can perform the following tasks: • Schedule periodic storage reports that allow you to identify trends in disk usage. • Monitor attempts to save unauthorized files for all users or a selected group of users. • Generate storage reports instantly.
downloaded from Microsoft at http://www.microsoft.com/technet/itsolutions/smbiz/mits/av/ mit_av.mspx. Security For guidance on hardening file servers, see the Microsoft Windows Server 2003 Security Guide. The guide can be viewed or downloaded at http://www.microsoft.com/technet/security/prodtech/ windowsserver2003/w2003hg/sgch00.mspx. More information The following web sites provide detailed information for using print services with Windows Server 2003, which also applies to Windows Storage Server 2003.
B Print services Microsoft Print Management Console Print Management in the Microsoft Windows Server 2003 R2 operating system is a Microsoft Management Console (MMC) snap-on that system administrators can use to perform common print management tasks in a large enterprise. It provides a single interface that administrators can use to perform printer and print server management tasks efficiently with detailed control.
Network printer drivers Updated print drivers for HP network printers are preinstalled on the storage system. If a Service Release DVD has been run on the server, there are updated HP network print drivers in the C:\hpnas\PRINTERS folder. Print services management Print services information to plan, set up, manage, administer, and troubleshoot print servers and print devices are available online using the Help and Support Center feature.
• Web-based printer management with the ability to administer, connect to, and view printers through a web browser. • Internet printing enabling users to connect to a printer using the printer's URL. A Microsoft white paper discussing the uses of both components can be obtained at http:// www.microsoft.com/windowsserver2003/techinfo/overview/internetprint.mspx. Planning considerations for print services Before configuring the print server, the following checklist of items should be followed: 1.
be created on the print server. The utility is located on the storage system in the C:\hpnas\Components\Install Network Printer Wizard folder. Sustaining print administration tasks Tasks that need to be performed regularly to support the print services include: • Monitoring print server performance using the built-in performance monitoring tool in the Windows Server operating system. • Supporting printers that include adding, moving, and removing printers as requirements change.
Internet is required, or the utility can be pointed to a local location where the firmware images are stored. For more information on upgrading HP Jetdirect print server firmware, see http:// h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj06917. Printer server scalability and sizing A Microsoft technical paper overviews several key factors that influence the capacity of a given print server configuration.
• Stop and restart the spooler service, or restart the print server. Troubleshooting The online help or Help and Support Center feature should be used to troubleshoot general and common print-related problems. Printing help can be accessed by selecting Start > Help and Support, then the Printers and Faxes selection under Help Contents. The same print troubleshooting information can be accessed at http://www.microsoft.
C Microsoft Services for Network File System (MSNFS) This chapter discusses networking features in Microsoft Services for Network File System (MSNFS). MSNFS Features MSNFS is an update to the NFS components that were previously available in Services for UNIX 3.5.
• Administration components • Password synchronization • Server for NIS The UNIX Identity Management component is not enabled by default on the storage system. To install this component: 1. Access Add/Remove Programs. 2. Select Add/Remove Windows Components > Active Directory Services > Details. 3. Install Identity Management for Windows.
1. Go to Add/Remove Programs. 2. Select Add/Remove Windows Components > Other Network File and Print Services > Microsoft Services for NFS > Details. 3. Install Client for NFS. Administering MSNFS To access Microsoft Services for Network File System from the Start menu: 1. Select Start > Programs > Administrative Tools. 2. Click Microsoft Services for Network File System. To access Microsoft Services for Network File System from the HP All-in-One Management Console: 1.
Refer to Table 47 for guidance as to when to use NFS Authentication DLL instead of S4U legacy NFS and R2 MSNFS.
5. Read the End User License Agreement carefully. If you accept the terms of the agreement, click I accept the terms in the License Agreement, and then click Next to continue installation. If you click I do not accept the License Agreement (Exit Setup), the installation procedure terminates. 6. Click Custom Installation, and then click Next. 7. In the Components pane, click the down arrow next to Windows Services for UNIX, and then click Entire component will not be available. 8.
Accessing NFS resources for Windows users and groups Server for NFS allows Windows clients to access NFS resources on the storage system without separately logging on to Server for NFS. The first time users attempt to access an NFS resource, the Server for NFS looks up the user’s UNIX UID and GID information in either Windows Active Directory or the User Name Mapping function on the storage system.
is not mapped to a Windows account is treated by Server for NFS as an anonymous user. By default, the user identifier (UID) and group identifier (GID) is -2. For example, if files are created on an NFS Share by UNIX users who are not mapped to Windows users, the owner of those files are listed as anonymous user and anonymous group, (-2,-2). By default, Server for NFS does not allow anonymous users to access a shared directory.
• Use naming conventions to identify shares with EUC encoding • Protect configuration files For further details, see the online help for Microsoft Services for Network File System. User Name Mapping The User Name Mapping component provides centralized user mapping services for Server for NFS and Client for NFS. User Name Mapping lets you create maps between Windows and UNIX user and group accounts even though the user and group names in both environments may not be identical.
User Name Mapping Administration The User Name Mapping administration online help contains information for the following topics: • • • • • • Understanding the User Name Mapping component Starting and stopping User Name Mapping Configuring User Name Mapping Securing access to the User Name Mapping server Managing maps Managing groups Best practices for User Name Mapping • Install User Name Mapping on a domain controller. • Create a User Name Mapping server pool.
Command Function showmount –e Views exports from the server and their export permissions unmount Removes NFS-mounted drives For further details, see the online help for Microsoft Services for Network File System. Optimizing Server for NFS performance The following sources provide useful information on how to optimize performance for Microsoft Services for NFS.
Point and print from UNIX to Windows Server 2003 Point-and-Print behavior from UNIX clients to Windows Server 2003 and Windows Storage Server 2003 is similar to the behavior for Windows 95, Windows 98, and Windows Millennium Edition clients, because all these clients create SMB connections. However, the non–Windows operating systems maintain their own driver model, so these clients do not automatically get the driver during Point and Print—they must install the driver locally.
Microsoft Services for Network File System (MSNFS)
D Other network file and print services This chapter discusses file and print services for NetWare and Macintosh. File and Print Services for NetWare (FPNW) File and Print Services for NetWare (FPNW) is one part of the Microsoft software package called Services for NetWare. The most common use of the NetWare network operating system is as a file and print server.
5. Select the NETSFNTSRV file, and then click OK. File and Print Services for NetWare should now be displayed as an option to install. 6. Select File and Print Services for NetWare, and then click OK. Managing File and Print Services for NetWare FPNW resources are managed through Server Manager. Server Manager can be used to modify FPNW properties and manager shared volumes.
2. Select FPNW, and then click Properties. Figure 32 File and Print Services for NetWare dialog box 3. Enter an FPNW Server Name and Description. This server name must be different from the server name used by Windows or LAN Manager-based clients. If changing an existing name, the new name is not effective until stopping and restarting FPNW. For example, in Figure 32 the Windows server name is Alamo and the FPNW server name is Alamo_FPNW. 4. Indicate a Home directory root path.
Adding local NetWare users 1. From the storage system desktop, click the Management Console icon, click Core Operating System, and then click Local Users and Groups. 2. Right-click the Users folder, and then click New User. Figure 33 New User dialog box 3. Enter the user information, including the user's User name, Full name, Description, and Password. 4. Click Create. 5. Repeat these steps until all NetWare users have been entered. Enabling local NetWare user accounts 1.
2. Click the NetWare Services tab. Figure 34 NetWare Services tab 3. Select Maintain NetWare compatible login. 4. Set other NetWare options for the user, and then click OK. NOTE: The installation of File and Print Services for NetWare also creates a supervisor account, which is used to manage FPNW. The supervisor account is required if the storage system was added as a bindery object into NDS.
Creating a new NCP share To create a new file share: 1. From the storage system desktop, select Start > Settings > Control Panel > Administrative Tools > Server Manager. 2. Select File and Print Service for NetWare> Shared Volumes. 3. Click Create Volume. 4. Specify the volume name and path. 5. Click Permissions to set permissions. 6. Click Add to add additional users and groups, and to set their permissions. 7. Highlight the desired user or group, and then click Add. 8.
Point and Print—they must install the driver locally. Like the Windows 95, Windows 98, and Windows Millennium clients, these non–Windows clients do not receive driver updates from the print server after a driver is initially downloaded. The same connection methods are available: drag and drop, the Add Printer Wizard, referencing a UNC path, or double-clicking the shared printer icon.
AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have been installed on the storage system. CAUTION: AppleTalk shares should not be created on clustered resources because data loss can occur due to local memory use. • To set up AppleTalk shares • To configure AppleTalk sharing properties • To allow client permission to an AppleTalk share If AppleTalk is enabled for your server configuration, specify which AppleTalk clients are granted access to each share.
E Configuring storage system for Web access (optional) Setting up an Internet connection Before running Windows 2003 R2 operating system updates, you must set up an Internet connection for the storage system. There are two methods for configuring an Internet connection: • Internet Explorer to use automatic configuration • Internet Explorer to use a proxy server To configure Internet Explorer to use automatic configuration 1. 2.
Figure 36 Proxy server settings 3. 4. 5. 6. 7. 182 In the Address box, type the network name or IP address of the proxy server. In the Port box, type the port number that is used by the proxy server for client connections (for example, 8080). Click the Bypass proxy server for local addresses check box if you do not want the proxy server computer to be used when you connect to a computer on the local network. Click OK to close the LAN Settings dialog box.
F Regulatory compliance and safety Federal Communications Commission notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.
Declaration of conformity for products marked with the FCC logo, United States only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett-Packard Company P. O.
WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the installation guide of the laser product may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation: • Do not try to open the module enclosure. There are no user-serviceable components inside. • Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein.
BSMI notice Japanese notice Korean notice A&B Class A equipment Class B equipment 186 Regulatory compliance and safety
Safety Battery replacement notice WARNING! The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury: • Do not attempt to recharge the battery. • Do not expose the battery to temperatures higher than 60˚C (140˚F). • Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Japanese power cord notice Electrostatic discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
Tento symbol na produktu nebo balení ozna uje výrobek, který nesmí být vyhozen spolu s ostatním domácím odpadem. Povinností uživatele je p edat takto ozna ený odpad na p edem ur ené sb rné místo pro recyklaci elektrických a elektronických za ízení. Okamžité t íd ní a recyklace odpadu pom že uchovat p írodní prost edí a zajistí takový zp sob recyklace, který ochrání zdraví a životní prost edí lov ka.
Estonian notice Seadmete jäätmete kõrvaldamine eramajapidamistes Euroopa Liidus See tootel või selle pakendil olev sümbol näitab, et kõnealust toodet ei tohi koos teiste majapidamisjäätmetega kõrvaldada. Teie kohus on oma seadmete jäätmed kõrvaldada, viies need elektri- ja elektroonikaseadmete jäätmete ringlussevõtmiseks selleks ettenähtud kogumispunkti.
garantiert eine Wiederverwertung, die die Gesundheit des Menschen und die Umwelt schützt. Informationen dazu, wo Sie Rücknahmestellen für Ihre Altgeräte finden, erhalten Sie bei Ihrer Stadtverwaltung, den örtlichen Müllentsorgungsbetrieben oder im Geschäft, in dem Sie das Gerät erworben haben.
Š ds simbols uz izstr d juma vai uz t iesai ojuma nor da, ka šo izstr d jumu nedr kst izmest kop ar citiem sadz ves atkritumiem. J s atbildat par to, lai nolietot s iek rtas tiktu nodotas speci li iek rtotos punktos, kas paredz ti izmantoto elektrisko un elektronisko iek rtu sav kšanai otrreiz jai p rstr dei.
Slovakian notice Likvidácia vyradených zariadení v domácnostiach v Európskej únii Symbol na výrobku alebo jeho balení ozna uje, že daný výrobok sa nesmie likvidova s domovým odpadom. Povinnos ou spotrebite a je odovzda vyradené zariadenie v zbernom mieste, ktoré je ur ené na recykláciu vyradených elektrických a elektronických zariadení.
och gör att avfallet återvinns på ett sätt som skyddar människors hälsa och miljön. Kontakta ditt lokala kommunkontor, din närmsta återvinningsstation för hushållsavfall eller affären där du köpte produkten för att få mer information om var du kan lämna ditt avfall för återvinning.
Glossary This section defines the terms used to describe the ASM user interface and program features. Actions pane The right pane in the main window of the ASM user interface that provides a list of actions, based on your current selection in the Content pane. Along with other selectable items, the Actions pane provides access to storage-allocation wizards, which help you allocate and configure storage.
data protection Protects data from being corrupted or lost as a result of hard drive failure. Methods used to provide data protection include RAID and backups. enforce allocated limit (quota) An enforced quota for the amount of storage available to a shared folder. An enforce allocated limit prevents data from being saved to a shared folder once all the storage space allocated to the shared folder is used. Exchange storage group The fundamental unit of storage management in Microsoft Exchange.
MMC snap-in Microsoft Management Console snap-in. An application added to the Microsoft Management Console. All-in-One Storage Manager is a MMC snap-in. NAS Network-attached storage. This term is used to refer to a specialized type of file server. The HP All-in-One Storage System provides NAS storage as well as iSCSI storage. Navigation pane The left pane in the main window of the ASM user interface that allows you to quickly navigate between HP All-in-One Storage System Management applications.
Status bar The area located at the bottom of the ASM user interface that displays server information and system alerts. tape library An enclosure filled with magnetic tape cartridges, tape drives, and a robot(s). The tapes are electronically labeled for identification and stored in library slots when not in use. When data needs to be written or read from a tape, the robot loads the tape cartridge into an available tape drive in the library.
Index A accessing All-in-One Management Console, 23 accessing application and shared folder properties, 94 accessing application server properties, 108 accessing properties for SQL Server, 99 for application server volumes, 108 for Exchange, 94 for HP All-in-One Storage System logical disks, 106 for HP All-in-One Storage System volumes, 106 for shared folders pools, 98 for the user-defined application pool, 101 accessing storage area properties, 106 ACL, defining, 151 Active Directory Lookup, 161 ActiveX en
documentation HP website, 15 providing feedback, 18 dynamic disks clustering, 50 spanning multiple LUNs, 49 E electrostatic discharge, 188 European Union notice, 185 expanding storage Array Configuration Utility, 130 extending volumes Disk Management, 130 HP All-in-One Management Console, 124, 152, 163 Array Configuration Utility, 126 Storage Manager, 126 technical support, 17 Web Jetadmin, 156 HP All-in-One Storage System alerts operating status values, 106 HP All-in-One Storage System logical disks acce
managing storage for application servers, 53 for shared folders, 54 Microsoft Exchange Server operating status values, 95 Microsoft Exchange storage group components Storage properties, 96 Microsoft Exchange storage groups Details properties, 95 Microsoft Exchange Server accessing properties, 94 Microsoft Print Management Console, 156 Microsoft Printer Migrator, 159 monitoring storage, 93 mount points not supported with NFS, 49 mount points creating, 49 mounted drives and shadow copies, 134 N NCP, creating
Server for NFS Authentication DLL, 163 Service for User for Active Domain controllers, 163 services for AppleTalk, installing, 179 Services for UNIX, 49, 51 set up Internet, 181 setting up overview, 19 setup completion, 32 shadow copies mounted drives, 134 shadow copies, 50 backups, 143 cache file, 134 defragmentation, 133 described, 131 disabling, 138 file or folder recovery, 141 managing, 134 on NFS shares, 141 on SMB shares, 140 planning, 131 redirecting, 137 scheduling, 136 uses, 131 viewing list, 136 S
W warning rack stability, 16 Warning Threshold, 96 WEBES (Web Based Enterprise Services, 118 websites customer self repair, 17 HP , 18 HP Subscriber's Choice for Business, 17 product manuals, 15 WEEE directive, 188 All-in-One Storage System 203
Index