HP StorageWorks All-in-One Storage System user guide (440583-005, February 2008)

ValueProperty
Communication protocol used to transfer data between the server that
hosts Exchange (and the storage group component) and your HP
All-in-One Storage System.
Protocol
Name of server that hosts Exchange and the storage group component.Application Server Host Name
Name of the volume on the server that hosts Exchange to which
Exchange saves the storage group component's data. The volume
resides on the iSCSI LUN exported by ASM to the server that hosts
Exchange.
Application Server Volume -
Name
Status of the volume on the server that hosts Exchange where the storage
group component is stored.
Application Server Volume -
Status
Indicates if storage group component's storage is configured with
exclusive storage. See Table 19 on page 72 for more information.
Application Server Volume -
Exclusive Storage
The RAID level to which the storage group component storage is
configured. See Customizing RAID levels on page 73 for more
information.
Application Server Volume - RAID
Level
The RAID stripe size to which the storage group component's storage
is configured. See Table 19 on page 72 for more information.
Application Server Volume - RAID
Stripe Size
Speeds up reads when enabled. This setting is determined by the
storage array, not ASM.
Application Server Volume - Read
Cache
Speeds up writes when enabled. This setting is determined by the
storage array, not ASM.
Application Server Volume -
Write Cache
The number of hot spares with which the storage group component
storage is configured. See Table 19 on page 72 for more information.
Application Server Volume -
Number of Hot Spares
Path the volume is mounted on, on the server that hosts Exchange. The
volume is built on the iSCSI LUN exported by ASM to the server that
hosts Exchange.
Application Server Volume -
Mount Paths
• Warning Threshold tab—(Exchange storage group components) Allows you to change the Percent
Full Warning Threshold value for the storage group component. See
Setting a percent full warning threshold on page 74 for more information.
• Mail Store, Public Store, or Log tab—(Exchange storage group components) One of these three
tabs is available depending on whether the storage group component is a mail store, public store,
or log.
• Mail Store tab—Displays the status and properties of the mail store reported byt the Exchange
server.
Table 24 Mail Store tab: Exchange storage group component properties
DescriptionValue
Name of storage group mail store.Mail Store Name
The storage group mail store is available for use.Online
Path to the file that stores all messages submitted through MAPI, as
well as the database tables that define mailboxes, messages, folders,
and attachments.
Database File
Monitoring storage96