HP StorageWorks Auto Path XP for AIX V04.40-/B Installation Guide (B7949-96009, November 2004)

22 HP StorageWorks Auto Path for AIX: Installation Guide
b. Change the attribute fc_err_recov of the parent device (fscsin) to
fast_fail.
# chdev -l fscsin -a fc_err_recov=fast_fail
c. Confirm that the setup of the parent device (fscsin) to fast_fail is
effective.
# lsattr -El fscsin
Example
fc_err_recov fast_fail FC Fabric Event Error
RECOVERY Policy True
6. Make sure the license key is in the /var/DLM/dlm.lic_key file, or a
/var/tmp/hdlm_license file is present.
Important Make a backup of this file. The version 04.40 installation will delete
this file and the /var/DLM directory.
7. Insert the Auto Path 04.40 CD into the drive. There is no need to mount
the CD.
8. Execute the install command:
# installp –aXgd /dev/cd0 all
Alternately, you can specify the special file of the installation medium
in place of /dev/cd0.
9. Verify that the package was installed:
# lslpp -L AutoPath.rte
Verify that AutoPath.rte appears among the file set items in the
output list and that its status is C (Commit). See the readme file on the
Auto Path for AIX CD for the current level.
10. Verify that the dlmfdrv.conf or dlmfdrv.unconf file is in the
/usr/DynamicLinkManager/drv directory.