3.6.0 Matrix Server Installation Guide (5697-7079, February 2008)

Chapter 3: Install PolyServe Matrix Server 30

2. Fencing Action. When a server needs to be restricted from the SAN,

Matrix Server can either power-cycle the server or shut it down. Select

the method that you want to use.

If you have FibreChannel-connected storage and want to configure your

FibreChannel switches into the matrix, go to the Switch Information tab.

(This step is optional; however, if the switches are configured the

PolyServe Management Console can display the switch ports used by the

SAN.)

1. SAN Switches. Specify the hostnames or IP addresses of the

FibreChannel switches that are directly connected to the nodes in the

matrix. Click Add, and then specify the hostname or IP address of the

first FC switch.