3.6.0 Matrix Server Installation Guide (5697-7079, February 2008)

Chapter 3: Install PolyServe Matrix Server 34

NOTE: Array-based hardware snapshots are supported on Engenio

storage arrays and Hewlett-Packard StorageWorks Enterprise

Virtual Array (EVA) storage arrays. The appropriate Engenio

or HP software must be installed as described under step “15.

Install Hardware Snapshot Software (Optional)” on page 19.

To configure the snapshot method, click Add, select the appropriate

method, and then supply any requested configuration information.

HP-EVA storage array. You will be asked for the hostname and

authentication information for the management appliance.

Engenio storage array. You will be asked for the hostnames or IP

addresses and the password for your storage array controllers.