3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

source and debug kernels for that operating system. This guide describes how to
install the kernel RPM and the binary and source RPMs.
For RHEL5, the following binary and source kernel RPMs are provided:
• kernel-HPPS-2.6.18-92.el5.370.<xxxx>.<arch>.rpm (the binary
kernel)
• kernel-2.6.18-92.el5.370.<xxxx>.src.rpm (the architecture-independent
source kernel)
• kernel-HPPS—devel–2.6.18-92.el5.370.<xxxx>.<arch>.rpm (archi-
tecture- and configuration-specific development kernel)
For SLES10, the following binary and source kernel RPMs are provided:
• kernel-HPPS-2.6.16.60-0.21.370.<xxxx>.<arch>.rpm (the binary
kernel)
• kernel-source-2.6.16.60-0.21.370.<xxxx>.src.rpm (the architecture-
independent source kernel)
• kernel-source-2.6.16.60-0.21.370.<xxxx>.<arch>.rpm (the archi-
tecture-specific source kernel)
The HP Scalable NAS kernels RPM also includes debug kernels that can be installed
under the direction of HP Support. For RHEL5, the debug kernels are:
• kernel-HPPS_debug-2.6.18-92.el5.370.<xxxx>.<arch>.rpm
• kernel-debuginfo-common-2.6.18-92.el5.370.<xxxx>.<arch>.rpm
• kernel-HPPS_debug-devel-2.6.18-92.el5.370.<xxxx>.<arch>.rpm
For SLES10, the debug kernels are:
• kernel-HPPS_debug-2.6.16.60-0.21.370.<xxxx>.<arch>.rpm
• kernel-HPPS_kdump-2.6.16.60-0.21.370.<xxxx>.<arch>.rpm
• kernel-source-debuginfo-2.6.16.60-0.21.370.<xxxx>.<arch>.rpm
Contents of the HP Scalable NAS distribution
The HP Scalable NAS distribution contains the following files:
• pmxs-3.7.0-<xxxx>.<arch>.rpm. The HP Scalable NAS software in Red
Hat Package Manager (RPM) format. The RPM also includes drivers for the sup-
ported Host Bus Adapters.
• mxconsole-3.7.0-<xxxx>.<arch>.rpm. The Management Console and
mx utility in RPM format.
Install HP Scalable NAS and FS Option for Linux16