HP StorageWorks Storage System Scripting Utility reference (September 2005)

• SINGLE—reserves space within a disk group to allow for data reconstruction for failure of a
single disk drive
• DOUBLE—reserves space within a disk group to allow for data reconstruction for failure of
two disk drives
NOTE:
The space set aside is not in numbers of physical disks. It is the equ ivalent amount of storage space
spread across all disks.
Example
SET DISK_GROUP “\Disk Groups\pool” NAME=”nuclear secrets”
This example renames the disk group pool with the new name nuclear secrets.
SET D ISKSHELF
The SET D ISKSHELF command changes the specified disk enclosure properties.
Syntax
SET DISKSHELF <diskshelf name>
Switches
TheonlyswitchavailablefortheSETDISKSHELFcommandisCOMMENT.
COMMENT=
This is an optional switch that associates a user-defined comment with the disk enclosure. A maximum of
128 characters (including spaces) is allowed, and the string must be enclosed in double quotes.
SET FOLDER
The SET FOLDER command changes the specified folder properties.
NOTE:
youcannotrenamerootfolders.
Syntax
SET FOLDER <name>
Switches
The switches available for the SET FOLDER command are described in the following paragraphs.
COMMENT=
This is an optional switch that associates a user-defined comment wi th the new system. A maximum of
128 characters is allowed, and the string must be enclosed in double quotes.
NAME=
New name to g
ive to the specified folder.
62
Utility command reference