HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

100 CLI commands for the XP128/XP1024/XP10000/XP12000
Arguments [-domain <domain...>]
The output displays all LDEVs defined in the disk array for the given domain numbers.
[-pg <PG...>]
The output is limited to the given parity group numbers.
[-vdev <vdev...>]
The output is limited to the given VDEV numbers.
[-cv]
The output is limited to the custom volumes present in the disk array.
[-nv]
The output is limited to the normal volumes present in the disk array.
[-deletable]
Displays all LDEVs that can be deleted using the delete ldevs command. The LDEV must not
have a path, be a part of a LUSE volume, be a command device or be an Auto LUN reserved
volume. The output is the same as the default output for the list vsc command.
[-unused]
Displays the LDEVs not present in the disk array. This information can be used to create new
LDEVs. This command can be useful when used with the create custom_ldevs command,
where you must supply CU:LDEV values for new LDEVs to be created. The default output displays
all the LDEV numbers that are not present in the disk array.
Example list vsc without any options displays all the custom and normal defined in the disk array.
Domain PG Vdev CU LDEV LDevType
1 1 1 00 00 Custom
1 1 1 00 0A Custom
1 1 1 00 0B Custom
1 1 1 00 0C Normal
The -l option displays all the custom and normal volumes defined in the disk array along with the
association configuration information.
Domain PG Vdev CU LDEV Emulation Capacit(MB) RAID LDevType
1 1 1 0 00 OPEN-E 2347 RAID1 Normal
1 1 1 0 01 OPEN-9*3 2347 RAID5 Custom
1 1 1 0 0A OPEN-3*5 2347 RAID5 Custom
1 1 1 0 0B OPEN-E 2347 RAID5 Normal
[-unused]
list vsc -unused
CU LDev
0 f0
0 f1
0 f2
0 f3
0 f4
0 f5
0 f6
1 ff
2 f0
2 ff