HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

104 CLI commands for the XP128/XP1024/XP10000/XP12000
list acp_status or list dka_status
Description This command displays array control processor (ACP) and disk adapter (DKA) details. The terms
ACP and DKA refer to the same component. You can also provide ACP/DKA names to view the
status of specific ACPs/DKAs.
Syntax list acp_status [-acp <acpname...> | -s <statustype...>]
or
list dka_status [-dka <dkaname...> | -s <statustype...>]
Arguments [-acp <acpname...>] or [-dka <dkaname...>]
Displays the status of the specified ACPs/DKAs. <acpname> or <dkaname> can be one value,
a set of values, or a range of values (for example, 1C or 1C:1D or 1C-1E).
[-s <statustype...>]
Displays only those ACPs/DKAs with the specified status type. <statustype> can be one
value or a set of values (for example, acute or acute:service). Values are normal, acute, service,
moderate, and serious.
Example
Cluster# DKA# Name Status
1 1 DKA-1B Normal
1 2 DKA-1C Service
1 3 DKA-1D Acute
1 4 DKA-1E Serious
-l option
The -l option lists a detailed error status for the ACPs/DKAs with errors.
Component Status REFCODE Category Error
DKA-1C Moderate 3D9D10 DKA Processor Error Injustice DC Voltage Control
DKA-1D Moderate 3D9E20 DKA Processor Error Injustice CE MODE