HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 113
list pg_status
Description This command displays parity group (PG) status details.
Syntax list pg_status [-s <statustype...>] [-pg <pgname...> |
-domain <domain...> | -dku <dku...>]
[-disk | -ldev | -map]
Arguments [-s <statustype...>]
Displays only parity groups with the specified status types. <statustype> can be one value or
a set of values (for example, acute or acute:service). Values are normal, acute, service, moderate,
and serious.
[-pg <pgname...>]
Displays only the specified parity groups (for example, 1-1 or 1-2 or 1-1:1-2).
[-domain <domain...>]
Displays only the parity groups in the specified domains (for example, 1 or 1:3).
[-dku <dku...>]
Displays only the parity groups in the specified DKUs (for example, R1 or R3 or R1:R3).
[-disk]
Displays physical disk status details.
NOTE: The -disk does not identify the concatenated parity groups.
[-ldev]
Displays logical device (LDEV) status details.
[-map]
Displays the parity group status details for connected and/or concatenated parity groups.
Example
DKU# FB4# PG# Name Size(MB) Status
1 1 1 1-1 20 Normal
1 1 2 1-2 30 Service
[-map]
DKU# FB4# PG# Name Size(MB) Status ConnectedPGs
R0 1 1 01-01 406406 Normal
R0 1 2 01-02 406406 Normal 1-2;1-3
R0 1 4 01-04 406406 Service
[-disk]
DKU# Name DISK Status
R0 01-01 R0000 Normal
R0 01-01 R0100 Service
[-ldev]
DKU# PG Ldev Size(MB) Emulation Status
1 1-1 0:00 20 OPEN-3 Normal
1 1-2 0:20 30 OPEN-9 Service