HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

172 CLI Commands for the XP48 and XP512
list acp_status or list dka_status
Description This command displays array control processor (ACP) and disk adapter (DKA) details. The terms
ACP and DKA refer to the same component. You can also provide ACPs/DKAs names to view the
status of specific ACPs/DKAs.
Syntax list acp_status [<acpname...> | -s <statustype...>] [-x]
or
list dka_status [<dkaname...> | -s <statustype...>] [-x]
Arguments [<acpname...>] or [<dkaname...>]
Displays the status of the specified ACPs/DKAs.
[-s <statustype...>]
Displays only those ACPs/DKAs with the specified status type (for example, acute or service).
Values are normal, acute, service, moderate, and serious.
[-x]
Lists a detailed error status for the ACPs/DKAs with errors.
Example
Cluster# DKA# Name Status
1 1 DKA-1B Normal
1 2 DKA-1C Service
1 3 DKA-1D Acute
1 4 DKA-1E Serious
[-x]
Component Status REFCODE Category Error
DKA-1C Moderate 3D9D10 DKA Processor Error Injustice DC Voltage Control
DKA-1D Moderate 3D9E20 DKA Processor Error Injustice CE MODE