HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 197
6 Error messages
This chapter contains CLI error messages and codes you may encounter if a problem occurs during
validation.
There are two types of validations performed on CLI commands:
• Command syntax validation
• Configuration validation
Both validation types return error messages or codes if a problem is found with a command.
Command syntax validation verifies the syntax of the command, such as the record format, field type, and
ranges for CUs, LDEVs, and so forth.
Configuration validation compares the data submitted to the disk array’s configuration. The process checks
for configuration errors, such as a duplicate record existing in the disk array, or invalid configuration
parameters, such as invalid CU numbers, LDEV numbers, or WWN numbers.
This chapter contains the following tables:
• Error messages, page 197
• XP48/XP512 error codes, page 203
• XP128/XP1024/XP10000/XP12000 error codes, page 213
Error messages
Table 3 Error messages
Error message Problem/resolution
AT_LEAST_ONE_OF_THE_ARRAY_SERIAL_NO
S_IS_NOT_ADDED_TO_
THE_CV_SERVER
The serial number entered with the "modify attributes <user
name> -grant <array Sl.No>..." or "modify attributes <user
name> -revoke <array Sl.No>..." argument is not valid or
not managed by the Command View management station.
Check the serial number and make sure the array is one
managed by Command View.
CANNOT_ADD_USER.
THE_USER_NAME_IS_RESERVED
The user name entered with the “create user"
command is the same as one of the hidden IDs
(such as cvapiadmin, guest, read1guest).
Enter a different user name.
CANNOT_ADD_USER.
USER_NAME_ALREADY_EXISTS.
PLEASE_USE_A_DIFFERENT_USER_
NAME
The user name entered with the “create user"
command is the same as one of the default user IDs
(Administrator, StorageAdmin, User).
CANNOT_ADD_USER.
USER_ALREADY_EXISTS.
PLEASE_USE_A_DIFFERENT_USER_
NAME
The user name entered with the “create user” command
already exists. Enter a different user name.
CANNOT_DELETE_A_USER_ALREADY_
LOGGED_INTO_THE_CV_
MANAGEMENT_STATION
The user who is being deleted is currently logged into the
Command View management station. Make sure the user is
logged out before deletion.
CANNOT_DELETE_USER.
DEFAULT_USERS_MAY_NOT_BE_DELETED
The user name entered with the “delete user"
command is the same as one of the default user IDs
(Administrator, StorageAdmin, User).
CMD_DEVICE_FORMAT Invalid format. The format should be: CU, Ldev, LuCmd
Device.
CONNECTED_TO_SOME_OTHER_ARRAY Please disconnect the current array to connect to another
array.