HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 199
INVALID_LDEV_TYPE Invalid LDEV value. The value should be a hex string.
INVALID_LDEV_VALUE Invalid LDEV value. The LDEV value is out of range.
INVALID_LDEVS_TYPE Invalid type. The format of device LDEVs in LUSE must be in
hex.
INVALID_LENGTH Invalid WWN/WWNGrpName length.
INVALID_LIST_FORMAT The list record format is invalid. Use the help command for
the actual format.
INVALID_LOAD_ENV Problem encountered in loading the CLI operating
environment.
INVALID_LUN_RANGE The LUN ID is out of range.
INVALID_LUNID_TYPE Invalid LUN ID value. Should be a hex string.
INVALID_LUNID_VALUE Invalid LUN ID value.
INVALID_NICKNAME Invalid LunGroup/WWNGroup Nickname.
INVALID_NICKNAME_LENGTH Invalid Nickname. The LUNGrp/WWNGrp Nickname
length should be 8 bytes.
INVALID_OPERATION The specified operation is invalid.
INVALID_PGNAME The specified PG name is invalid.
INVALID_PORTNAME The port name is invalid.
INVALID_RECORD The commands Execute/List/Help can’t be part of a batch
file.
INVALID_SCSID_RANGE The SCSI ID is out of range.
INVALID_SCSID_TYPE Invalid SCSI ID value. The value should be a hex string.
INVALID_SERIAL_NUMBER Invalid serial number.
INVALID_SERIAL_NUMBER_TYPE Invalid serial number. The serial number should be numeric
and less than 65539.
INVALID_SWITCH_TYPE The switch value must be ON or OFF.
INVALID_SWITCH_VALUE Invalid value.
INVALID_TOP_CU_TYPE Invalid CU type. The top CU should be a hex value.
INVALID_TOP_CU_VALUE Invalid CU value. The top CU value is out of range.
INVALID_TOP_LDEV_TYPE Invalid type. The LDEV should be a hex value.
INVALID_TOP_LDEV_VALUE Invalid value. The top LDEV value is out of range.
INVALID_USER_NAME The user name entered with the “delete user"
command is the same as one of the hidden IDs
(such as cvapiadmin, guest, read1guest).
Enter a different user name.
INVALID_USER_NAME In "modify attributes <user name> -grant <array Sl.No>" or
"modify attributes <user name> -revoke <array Sl.No>" , an
invalid user name was entered. Ensure the correct user name
is entered.
INVALID_USER_NAME_OR_PASSWORD.
TERMINATING
Invalid user name or password. Ensure that the correct user
name and password are entered.
INVALID_VALUE Invalid value. The value should be a hex string.
Table 3 Error messages (continued)
Error message Problem/resolution