HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

200 Error messages
INVALID_WWN_BYTE_SIZE The value should be a 16 character string.
INVALID_WWN_GRP_NICKNAME_SIZE Invalid WWN Group Nickname size. The size should be a
maximum of 8 bytes.
INVALID_WWN_ID_RANGE The WWN ID is out of range.
INVALID_WWN_NickName_SIZE Invalid WWN Nickname size. The size should be a
maximum: 8 bytes.
INVALID_WWN_TYPE Invalid WWN type. Should be a hex string.
LIST_COUNT_FOR_VOLUME_INIT
_FORMAT
Invalid list.
LIST_FORMAT Invalid format. The format should be: list <OperationType>.
LIST_FREE_LDEVs_PER_CU_FORMAT Invalid format. The format should be: list free_Ldevs_Per_CU
[-cu <CU>].
LIST_LDEV_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_LDEV_SIZE_INFO_FORMAT Invalid format. The format should be: list ldev_Size_Info [-pg
<ParityGroup>] [-cu <CU>].
LIST_LUN_FORMAT Invalid format. The format should be: list lun -port
<portname>.
LIST_LUN_SEC_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_LUNGRP_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_LUNGRP_SEC_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_LUSE_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_PG_FREESPACE_INFO_FORMAT Invalid format. The format should be: list pg_freespace_info
[-pg <ParityGroup>].
LIST_PG_VOLUME_INFO_FORMAT Invalid format. The format should be: list pg_Volume_Info
[-pg <ParityGroup>].
LIST_WWN_FORMAT Invalid format. Use the help command to see the actual
format.
LIST_WWNGRP_FORMAT Invalid format. Use the help command to see the actual
format.
LUN_GRP_FORMAT Invalid format. The format should be: PortName,
LunGrpNickname, Luns in hex (minimum 2).
LUN_GRP_NICKNAME_FORMAT Invalid format. The format should be: PortName,
oldLunGrpNickname, NewLunGrpNickname.
LUN_GRP_SEC_FORMAT Invalid format. The format should be: PortName,
LUNGrpNickname, WWNs or WWNGroupNames.
LUN_SEC_FORMAT Invalid format. The format should be: PortName, LUN IDs,
WWNs or WWNGroupNames.
LUN_SWITCH_FORMAT Invalid format. The format should be: PortName, ON/OFF.
LUSE_FORMAT Invalid format. The format should be: Expand Lun TopCU,
TopLdev, -limit ldevCount -Lun Portname, SCSID, LUN.
Table 3 Error messages (continued)
Error message Problem/resolution