HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

206 Error messages
1078 It was going to create Reserve volume for Auto LUN to the volume which constitutes
extension LU.
1079 It was going to create Reserve volume for Auto LUN to the volume to which DCR is
set.
1080 It was going to create Reserve volume for Auto LUN to the volume blockaded.
1081 It was going to create Reserve volume for Auto LUN to the volume to which the
command device is set.
1082 It specified as Reserve volume for Auto LUN to the volume not existing.
1083 Reserve volume was set up as Reserve volume for Auto LUN to the volume which is
setting ending.
1084 The volume specified as Reserve volume for Auto LUN is over the number (64) of the
maximum assignment. Or it was going to cancel the volume more than the number
registered with Reserve volume.
1085 The volume specified as Reserve volume for Auto LUN is set up as moved material
volume.
1086 The volume specified as Reserve volume for Auto LUN has not supported RAID level.
(An object RAID level is 1 or 5.)
1087 The specified move start time is in specification prohibition at the time of automatic
move plan creation of Auto LUN.
1088 The specified time cannot be set up at the time of Auto LUN functional parameter
setup.
1089 An error is in the form of the specified date at the time of Auto LUN composition
change.
1090 An error is in the form of the specified time at the time of Auto LUN composition
change.
1091 The specified date cannot be set up at the time of Auto LUN composition change.
1092 The specified time cannot be set up at the time of Auto LUN composition change.
1093 The specified total term is outside the range of a totaled term at the time of a total
command setup of Auto LUN.
1094 The deletion demand was carried out to the volume which is not Reserve volume, at
the time of Reserve volume release for Auto LUN.
1095 Reserve volume which can be assigned does not exist at the time of HISHM volume
move start (under use).
1096 The setup of Reserve volume for Auto LUN was demanded from the volume to which
the path group is set.
1097 The composition change demand was carried out to the function in which it does not
support.
1098 The setup of the rate of the class maximum use was demanded from the class number
not registered.
1099 The setup of a fixed parity group was demanded from FB4 number not registered or
the parity group number.
1100 There is less affiliation WWN to WWN group than two.
Table 4 XP48/XP512 error codes (continued)
Error code Description