HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

210 Error messages
1245 Over the upper limit of Request (Instance) Number for the prediction data of
Utilization. Delete the instance that is not used.
1246 In the request of Auto LUN configuration data change, more than one same request
is set in one PDU. Same type set request send by each other PDU.
1247 In the request of Auto LUN configuration data change, DKP Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1248 In the request of Auto LUN configuration data change, CHP Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1249 In the request of Auto LUN configuration data change, BUS Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1250 In the request of Auto LUN configuration data change, DRR Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1251 In the request of Auto LUN configuration data change, LDEV Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1252 In the request of Auto LUN configuration data change, ECC Group Number that is
specified in the request is incorrect. Change Request and re-send Set-Request.
1253 In the request of Auto LUN configuration data change, MPA Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1254 In the request of Auto LUN configuration data change, CARB Number that is
specified in the request is incorrect. Change Request and re-send Set-Request.
1255 In the request of Auto LUN configuration data change, Cache Number that is
specified in the request is incorrect. Change Request and re-send Set-Request.
1256 In the request of Auto LUN configuration data change, SM Number that is specified
in the request is incorrect. Change Request and re-send Set-Request.
1257 In the request of Auto LUN configuration data change, Combination between MPA
and CARB that is specified in the request is incorrect. Change Request and re-send
Set-Request.
1258 There is nothing the port that is defined. (Incorrect number, Not Fibre port). Change
Request and re-send Set-Request.
1259 When change request to the configuration data of port control, set the upper limited
value to the priority port. Change Request and re-send Set-Request.
1260 When change request to the configuration data of port control, set the threshold level
to the non priority Port. Change Request and re-send Set-Request.
1261 Path cannot be configured for the LDEV which is reserved for On-Demand.
1262 Command Device setting cannot be configured for the LDEV which is reserved for
On-Demand.
1263 The LUSE related configuration change cannot be executed for LDEV which is
reserved for On-Demand.
1264 The LDEV cannot be reserved for Auto LUN as it is reserved for On-Demand.
1266 Auto LUN Manual Migration was requested for LDEV which is reserved for
On-Demand.
1267 Auto LUN Auto Migration was requested for LDEV which is reserved for On-Demand.
Table 4 XP48/XP512 error codes (continued)
Error code Description