HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

212 Error messages
2006 Your environment did not include all of needed program product. (Ex: LUN
configuration Manager XP or R.C. system resources.)
2007 Your request of LUSE configuration was rejected, because LUN configuration
Manager XP was not installed. (R.C. program/LUNM/LUSE)
2008 Your request of LUN security was rejected, because Secure Manager XP was not
installed. (R.C. Program/LUN Security).
2009 Your request was rejected, because the version of SVP/DKC was incorrect.
2010 Your request of configuration change of port was rejected, because some hosts
issued I/Os to the port and the closed port request was rejected.
2011 There might be hardware error. Also, array microcode may have been installed
incorrectly. Have your HP service representative re-install the DKC microcode.
2012 There might be the failure of port.
2013 There might be the failure at download.
2014 There might be recoverable error of Port.
2015 Your request was rejected, because of SVP operation.
2016 Your request was rejected, because of SVP operation.
2017 SNMP Agent released the lock state that was issued from somebody. Because he did
not reissue lock request as the health check at regular interval.
2018 XP48/XP512: License Key for Cache LUN is not installed. Please install the same to
perform any Cache LUN SET operation.
2019 XP48/XP512: License Key for LUN CONFIGURATION MANAGER XP is not
installed. Please install the same to perform any VSC SET operation.
2020 DCR for Mainframe required in order to perform the concerned composition
information setting demand (P. P. Name: RC Program/DCR or D.C.R) is not installed.
2021 CVS for Mainframe required in order to perform the concerned composition
information setting demand (P. P. Name: RC Program/CVS or C.V.S) is not installed.
2022 A in CVS execution: Since SVP and DKC are CVS processing, time is set and a
composition information setting demand is published again.
2023 XP48/XP512: License Key for Auto LUN XP is not installed. Please install the same to
perform any Auto LUN SET operation.
2024 At the time of Auto LUN composition change, the obstacle occurred.
2025 At the time of Auto LUN composition change, the obstacle occurred.
2026 Use in common at the time of Auto LUN composition change. The obstacle occurred.
2027 The power-supply obstacle occurred at the time of Auto LUN composition change.
2028 It is [ PS ] under OFF at the time of Auto LUN composition change.
2029 At the time of Auto LUN composition change, the transmission obstacle (CHA)
occurred.
2030 At the time of Auto LUN composition change, the transmission obstacle (DKA)
occurred.
2031 The version of RMC, DKC, and SVP is not in agreement.
Table 4 XP48/XP512 error codes (continued)
Error code Description