HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 213
2032 The connection between DKC -SVP is busy. Wait a just moment, and re-try from
Refresh Request.
2033 The Configuration data is changing in SVP. Wait a just moment, and re-try from
Refresh Request.
2034 XP48/XP512: License Key for PORT CONTROL RESOURCE MANAGER is not
installed. Please install the same to perform any PORT CONTROL RESOURCE
MANAGER SET operation.
2035 Possible Auto LUN initialization problem. Go to on-line FAQ under Command View
“Support” tab. See item on “Possible Auto LUN initialization problem” for more
information.
2036 Required Data cannot be collected for Auto LUN.
2037 Please check the DKC status. If the problem persists on retrying the operation, please
contact the HP Product Support.
3000 SNMP Agent could not get the pointer of some external functions.
3001 SNMP Agent could not get the pointer of some external functions for the trace
information.
3002 SNMP Agent deleted the failure of logical interface the functions
3003 SNMP Agent detected internal logical error. Possible Auto LUN initialization
problem. Go to on-line FAQ under Command View “Support” tab. See item on
“Possible Auto LUN initialization problem” for more information.
3004 There was not the management directory of MIB.
3005 SNMP Agent failed to write the management data on the management directory of
MIB.
3006 There was some error of mandatory files for the SNMP Agent.
3007 An internal logical error happened in the Agent. Please contact the HP Product
Support.
Table 5 XP128/XP1024/XP10000/XP12000 error codes
Error code Description
10999 Failed to create internal worker thread. If this problem persists, please call the HP
Product Support.
11000 Failed to wait for internal event (Base). If this problem persists, please call the HP
Product Support.
11001 Failed to send internal message (Base). If this problem persists, please call the HP
Product Support.
11002 Failed to create the window for internal process. If this problem persists, please call
the HP Product Support.
11003 Failed to register the window class. Please call the HP Product Support.
11004 An error occurred. If this problem persists, please call the HP Product Support.
11005 An error occurred. If this problem persists, please call the HP Product Support.
11006 An error occurred. If this problem persists, please call the HP Product Support.
Table 4 XP48/XP512 error codes (continued)
Error code Description