HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

216 Error messages
22009 Invalid emulation type. The CV server configuration is not valid. Please call the HP
Product Support.
22010 Failed to access the environment file (File does not exists). Please call the service
personnel.
22011 Requests for configuration change of different products received at the same time.
Please contact the HP Product Support.
22013 Internal logical inconsistency. If this problem persists, please call the HP Product
Support. Please contact the HP Product Support.
22014 Array cannot be managed presently because some other manager may be trying to
manage the array. Wait for a while and reissue the request.
25038 The maximum number which can be processed was exceeded. Please reduce the
number of requests and try again.
25128 An error in the sequence of the operations occurred. Please report this to the HP
Product Support.
25508 Array cannot be managed presently because some other manager may be trying to
manage the array. Wait for a while and reissue the request.
25511 Path and host group cannot be deleted at the same time. Please perform the delete of
Path and Host Group separately.
26000 Event creation failed. Please call the service personnel.
26010 An error occurred. If this problem persists, please call the HP Product Support.
26020 Failed to open the environment file. Please call the service personnel.
26021 Failed to access the environment file. Please call the service personnel.
26500 SVP is busy. Please wait for a while and retry.
27028 An internal error occurred. Please try your operation again. If this problem persists,
please contact your HP support representative.
27058 Internal logical error. If this problem persists, please call the HP Product Support.
27209 Serial number for the device not registered. Please call the HP Product Support.
28998 Another user has locked the Array. Please try again later.
28999 No right to unlock. An error occurred. If this problem persists, please call the HP
Product Support.
29997 Error of the unsupported function. Please check the set data and re-execute the
operation. If the problem persists after a few tries, please call the HP Product
Support.
30999 Command device is set for the volume used in HP Continuous Access XP or HP
Business Copy XP. Please check the setting.
31000 You are trying to set multiple paths to the same volume from one group. Please check
the setting.
31001 You are trying to set multiple volumes to one group of port/group ID/LUN. Please
check the setting.
31002 Path cannot be set to unmounted volumes, LDEVs other than the top expanded LUSE,
reserved volume for Auto LUN and LDEVs set to On-Demand. Please check the
setting.
Table 5 XP128/XP1024/XP10000/XP12000 error codes (continued)
Error code Description