HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

218 Error messages
31033 The size specified during Customize Volume setting is out of the extent. (The value set
is smaller than the minimum value, or larger than the maximum value). Note that the
size depends on the emulation type of the target volume.
31034 The capacity for CV creation does not exist in the logical parity group. When setting,
note that the number of the LDEVs stored in the PG is different depending on the
drive type and RAID type. For details, please call the HP Product Support.
31035 The CV emulation type which cannot be mixed is specified. Or, the unsupported
emulation type is set. The definition is different depending on the emulation type. For
details, contact the HP Product Support.
31036 In the VSC operations, LDEVs with path assigned, part of LUSE and with LDEV
Security ON cannot be used.
31037 Internal logical error occurs. Please contact the HP Product Support.
31038 The CU number and LDEV number set in the VSC operation overlap with those of
other volumes. Please check the setting.
31039 Cache LUN settings needs to be specified while performing prestaging operation.
31040 Operation is instructed to the logical parity group which is not mounted in the VSC
operation. Please check the setting.
31041 During the VSC operation (Volume Initialize), the number of the volumes specified
doesn't match the number of normal volumes that needs to be restored. Please check
the settings.
31042 The Specified Sub-System ID already exists. Please Contact the HP Product Support.
31045 Request for Cache LUN release is given to the unmounted volume or the volume with
no Cache LUN settings. Please check the setting.
31046 During the VSC operation (Volume Initialize), CV is not set in the target logical parity
group. Please check the setting.
31047 When changing the LUSE configuration, LDEVs reserved for Auto LUN and
On-Demand volumes cannot be used.
31048 Wrong emulation type specified for VSC operation.
31056 LUN security settings cannot be given for ports other than Fibre Ports. Please check
the settings.
31058 LUN Security is not enabled for the particular port.
31059 During the CVS operation, the wrong emulation type and the wrong size which
matches the emulation type are specified. For mainframe volumes, specify the
user-specified number of the cylinder. For the open volumes, specify the user-specified
capacity.
31060 The specified WWN number is already registered in the Array. Please specify
another WWN.
31062 The Host Group nickname or WWN nickname is already registered. Please check
the settings.
31063 The WWN is not registered. Please check the settings.
31064 The Host Group that you are trying to register is already registered.
31065 The unregistered host group is specified. Please correct the specified contents.
Table 5 XP128/XP1024/XP10000/XP12000 error codes (continued)
Error code Description