HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 221
31352 Since the port for which you had performed the configuration change request is the
Initiator Port of CA, it cannot be changed. Please change the port attribute. (Change
to TarGet or RCU TarGet attribute.)
31353 Since the port for which you had performed the configuration change request is the
Initiator Port of CA, it cannot be changed. Please change the port attribute. (Change
to TarGet or RCU TarGet attribute.)
31354 The port tried to be set is the port for Fibre TrueCopy; it cannot be set. Please delete
the logical path and perform the configuration change operation again.
31597 Key for LUN Management Product is not installed or has expired. To perform any
operation related with LUN Management, you need to install a valid key. Please
contact HP Product Support.
31598 Key for Open Volume Management is not installed or has expired. To perform any
operation related with Open Volume Management, you need to install a valid key.
Please contact HP Product Support.
31599 Key for Volume Management Product is not installed or has expired. To perform any
operation related with Volume Management, you need to install a valid key. Please
contact HP Product Support.
31600 License for Open Cache Management is not installed or has expired. To perform any
operation related with Cache Management, you need to install a valid key. Please
contact HP Product Support.
31601 License for using the Cache Management function is not installed or has expired. To
perform any operation related with Cache Management, you need to install a valid
key. Please contact HP Product Support.
31999 Connection for communication between DKCs (SVPs) is failed. Please check the
setting of LAN. After the check, if the problem persists, please contact the HP Product
Support.
32000 Failed to obtain the configuration information. Confirm that the status from SVP to
DKC is normal. After the confirmation, if the problem persists, please contact the HP
Product Support.
32001 The file required by the application cannot be loaded. Memory could be insufficient.
Reboot the SVP and re-execute. If the problem persists, please contact the HP Product
Support.
32002 Memory required by the application cannot be reserved.
32003 The specified Port doesn't exist or is a Main Frame specific.
32006 The versions of the SVP and the microprogram of DKC do not match. Please check
the versions of the SVP and the microprogram of the DKC.
32007 The I/O from the host to the target path/volume may be sent. Please check if I/O
from the host to the target path/volume occurs.
32008 Please check the status of DKC (if it is blockaded). After the check, if the problem
persists, call the service personnel.
32009 Port blockade error occurs. Please contact the HP Product Support.
32010 Download error occurs. Please contact the HP Product Support.
32011 Port recovery error occurs. Please contact the HP Product Support.
Table 5 XP128/XP1024/XP10000/XP12000 error codes (continued)
Error code Description