HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

228 Error messages
5055997 SVP is busy. Please wait for a while and retry.
5056001 SVP is busy. Please wait for a while and retry.
5056002 SVP is busy. Please wait for a while and retry.
5056599 An internal server error occurred. Please contact the HP Product Support.
5056605 An internal server error occurred. Please contact the HP Product Support.
5056606 An internal server error occurred. Please contact the HP Product Support.
5056696 An internal server error occurred. Please contact the HP Product Support.
5056697 An internal server error occurred. Please contact the HP Product Support.
5057496 Timeout between DKC-SVP. If the problem persists after a few tries, please contact the
HP Product Support.
5057595 The request is rejected in DKC. If the problem persists after a few tries, please contact
the HP Product Support.
5057805 Invalid configuration information. If the problem persists after a few trials, please
contact HP Product Support.
5057896 Inconsistent configuration information. If the problem persists after a few tries, please
contact HP Product Support.
10100013 The specified fibre address is wrong. Please correct the content of the change request
and re-issue the operation.
10100055 The specified Host Group is already in use. Please correct the content of the change
request and re-issue the operation.
10104000 The product of number of Host Groups and number of LUN IDs specified should be
same as the number of LDEV IDs. Please correct the content of the change request
and re-issue the operation.
10104030 The maximum number of paths are already set. No paths can be further set for the
Host Group.
10104031 The maximum number of LUNs that can be set for a Host Group is 256. No further
LUNs can be set for the specified Host Group.
10104032 The maximum number of LUNs that can be set for a Port is 512. No further LUNs can
be set for the specified Port.
10104033 The specified number of LDEV IDs exceeds the number of free LUNs available. Please
reduce the LDEV IDs and retry the operation.
10104040 The specified LUN is already in use.
10104041 The specified LUN is not a Command Device.
10104042 Please specify a LUN which is already assigned.
10104043 No port is specified.
10104044 At least one path needs to be mapped to the Command Device.
10104045 Number of LDEVs specified are not valid for the LUN.
10104046 The specified LUN does not exist in the system.
10104047 No LUN ID specified for the configuration change request.
Table 5 XP128/XP1024/XP10000/XP12000 error codes (continued)
Error code Description