HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

232 Error messages
52046004 The emulation type of the specified target volume is not supported. If the problem
persists after a few trials, please contact the HP Product Support.
52046005 The upper limit value is exceeded (Source, Target, Reserve). Please check the number
of the volumes which can be set at a time.
52046006 The multiplicity of the copy job is exceeded. If the problem persists after a few trials,
please contact the HP Product Support.
52046007 The source volume is unmounted. If the problem persists after a few trials, please
contact the HP Product Support.
52046008 The source volume cannot be used. If the problem persists after a few trials, please
contact the HP Product Support.
52046009 The source volume is formatting. If the problem persists after a few trials, please
contact the HP Product Support.
52046010 The source volume is the command device. If the problem persists after a few trials,
please contact the HP Product Support.
52046011 The target volume is not mounted. If the problem persists after a few trials, please
contact the HP Product Support.
52046012 The target volume cannot be used. If the problem persists after a few trials, please
contact the HP Product Support.
52046013 The target volume is being formatted. If the problem persists after a few trials, please
contact the HP Product Support.
52046014 The target volume is the command device. If the problem persists after a few trials,
please contact the HP Product Support.
52046015 The volume specified as the target is not the target volume of the hierarchical control.
If the problem persists after a few trials, please contact the HP Product Support.
52046016 The volume specified as the source is the target volume of the hierarchical control. If
the problem persists after a few trials, please contact the HP Product Support.
52046017 Pair cannot be set to the specified source volume. If the problem persists after a few
trials, please contact the HP Product Support.
52046018 The specified target volume is used as the target volume of the hierarchical control. If
the problem persists after a few trials, please contact the HP Product Support.
52046019 The specified target volume is the source volume of the hierarchical control. If the
problem persists after a few trials, please contact the HP Product Support.
52046020 The specified source volume and the target volume are the same volume. If the
problem persists after a few trials, please contact the HP Product Support.
52046021 The volume specified as the source volume is the primary volume of CA. If the
problem persists after a few trials, please contact the HP Product Support.
52046022 The volume specified as the source volume is the secondary volume of CA. If the
problem persists after a few trials, please contact the HP Product Support.
52046023 The RAID level of the specified source volume is not supported. If the problem persists
after a few trials, please contact the HP Product Support.
52046024 The specified source volume is the primary volume of BC. If the problem persists after
a few trials, please contact the HP Product Support.
Table 5 XP128/XP1024/XP10000/XP12000 error codes (continued)
Error code Description