HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 31
add ipaddress
Description This command adds an SNMP manager’s IP address to the list in the disk array. Use this command
after connecting to a disk array.
This command is supported for the XP48/XP512.
Syntax add ipaddress <ipaddress...>
Arguments <ipaddress>
The IP address of the SNMP manager to be added. There must be at least one IP address
specified.
Example
add ipaddress 15.76.96.152,15.32.72.60