Manualshelf

HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks Command View XP
31323334353637383940
36 CLI commands for common administrative tasks
list array_status
Description This command displays the lock, refresh, and get state and status of all managed disk arrays or a
specific XP128/XP1024/XP10000/XP12000 disk array.
The lock states include:
• LOCKED: Command View has locked the disk array.
• UNLOCKED: The disk array is not locked by the Command View.
• ATTEMPTING: Command View is attempting to lock the disk array.
• ERROR: Error while attempting to lock the disk array.
The refresh states include:
• REFRESHING: The disk array is refreshing for the first time and is transferring the latest
configuration data.
• REFRESHED: The disk array is in the refreshed state.
• ERROR: Error while trying to refresh.
• IDLE: The disk array is not on a refresh cycle.
• SET OPERATION IN PROGRESS: Some set operations are in progress and the user cannot
complete any other set operations during this time.
The get states include:
• COMPLETE: Command View is done retrieving data.
• FIRST: The Command View server is retrieving data from the disk array. There is no cached data
available for the disk array.
• CACHED_DATA: Data is available in Command View, but it is from the local cache.
• OLD_DATA: Data from the disk array is not the latest.
• ERROR: The server has found an error condition while retrieving data.
• ERROR_NO_DATA: The server has found an error condition while retrieving data, and there is no
data available in the local cache.
Syntax XP48/XP512:I fee
list array_status
XP128/XP1024/XP10000/XP12000:
list array_status <array_serial_number...> [-lock]
[-refresh] [-get]
Arguments The following arguments are not supported for the XP48/XP512.
<array_serial_number...>
The serial number of the disk array whose status is to be displayed. Can be one value or a set of
values (for example, 30433 or 30433:35721).
[-lock]
Used to display the lock state only.
[-refresh]
Used to display the refresh state only.
[-get]
Used to display the get state only.