HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

68 CLI commands for the XP128/XP1024/XP10000/XP12000
Example [-address]
PortName Address
CL1-A EF(0)
CL1-B E2(3)
CL1-a 73(63)
CL1-b EF(0)
The -l option produces the same output as list port -l.
[-topology]
PortName Topology
CL1-A Fabric ON & Point-to-Point
CL1-B Fabric OFF & Point-to-Point
CL1-a Fabric ON & FC-AL
CL1-b Fabric OFF & FC-AL
The -l option produces the same output as list port -l.
[-hostgrp]
PortName HostGroupNicknameHostModeName
CL1-A nick1Standard
CL1-B nick2HP
CL1-a nick1Standard
The -hostGrp -l option displays all ports, all configured host groups for each port, the host mode
name for each host group, and the host mode number. This option cannot be used with -address,
-topology, or -security.
PortName HostGroupNicknameHostModeHostModeName
CL1-A nick100 Standard
CL1-B nick208 HP
CL1-a nick100 Standard
[-port <portname...> ]
The format of the output is the same as the default output for list port or list port with
-security, -address, -topology, or -hostGrp. The output reflects only the specified ports.
list port -security -port 1A:1C:1a-1e
PortName Security
CL1-A ON
CL1-C ON
CL1-a OFF
CL1-b ON
CL1-c OFF
CL1-d ON
CL1-e ON
The -l option produces output that is dependent on the options used. The format of the output is the
same as the output for list port -l, list port -l with -security, -address,
-topology, -hostGrp, etc., if used with those options. The key point is that the output displays
only the specified ports.