HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

Command View XP Command Line Interface (CLI) reference guide 73
modify fibre_topology
Description This command modifies the port topologies. It is available for fibre ports only.
Syntax modify fibre_topology <portname...>, <topology...>
Arguments <portname...>
The ports whose topologies are to be modified. <portname> can be specified as one port, a set
of ports, or a range of ports (for example, 1A or 1A:1C:1D or 1A-1E). Port names must be
specified in truncated form (for example, 1A and not CL1-A) because the hyphen (-) is used to
specify a range.
<topology...>
The topologies to be set. Fibre topologies are specified in the range between 1 to 4. The number
of values specified should be equal to the number of port names specified. If only one topology is
specified, all the ports are assigned the specified topology. If the number of values specified is
equal to the number of port names, then there is a one-to-one correspondence between the port
names and the topologies. In other cases this command generates an error.
Example
modify fibre_topology 1A,1
modify fibre_topology 1A:1B-1E,2
modify fibre_topology 1A:1B,1:2