HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

88 CLI commands for the XP128/XP1024/XP10000/XP12000
Arguments [-cmddev]
Displays only the LDEVs that have been designated as command devices. This option also
displays whether the command device security status is set to ON or OFF. This option cannot be
used with the -lu and -unallocated options.
[-lu]
Displays the LDEVs that are not expanded (“NOT EXPANDED”) and the top LDEVs in expanded
volumes (“EXPANDED TOP”). This option cannot be used with the -cmddev and
-unallocated options.
[-unallocated]
Displays all LDEVs that do not have any paths defined. This option cannot be used with the
-cmddev and -lu options.
[-emulation <emulation_type...>]
Used with other options or alone to display only LDEVs with the specified emulation types.
<emulation_type> can be specified as one value or a set of values (for example, OPEN-E or
OPEN-E:OPEN-3). -emulation used without any arguments generates an error.
[-ldev <ldev...>]
Displays only the specified LDEVs. <ldev> can be one value, a set of values, or a range of
values (for example, A or 0:A:1A or 0-F). LDEVs must be specified in hexadecimal and are not
case sensitive. -ldev without any arguments generates an error.
If the -ldev option is used along with -cu, the output displays the specified LDEVs in the
specified CUs. If any of the specified LDEVs do not exist, then those LDEVs are not displayed.
[-cu <cu...>]
Displays only the LDEVs in the specified CUs. <cu> can be one value, a set of values, or a range of
values (for example, 0 or 0:2:3 or 0-4). CUs must be given in hexadecimal. -cu without any
arguments generates an error.
Example list ldev without any options displays all the LDEVs defined in the disk array.
CU LDEV
00 00
00 0A
00 0B
00 0C
list ldev with the -l option displays all the LDEVs defined in the disk array, along with the
configuration information associated with each LDEV: CU, LDEV, Emulation, ExpansionStatus, Count,
Raid, Paths, Capacity, Reserve, DeviceType, and CmdDevSecurity.
CU LDEV Emulation ExpansionStatus LUSECount Raid Paths Capacity Reserve
DeviceType CmdDevSecurity
0 00 OPEN-E EXPANDED_TOP 3 RAID1 2 2347 Normal
Lun OFF
0 01 OPEN-9 NOT_EXPANDED - RAID1 2 2347 NORMAL
CmdDev ON
[-cmddev]
Displays all the command devices and their security switch status. For example, CU, LDEV,
DeviceType, and CmdDevSecurity.
CU LDEV DeviceType CmdDevSecurity
0 08 CmdDev ON
0 0F CmdDev OFF