HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)
Command View XP Command Line Interface (CLI) reference guide 89
Example [-lu]
Displays only the “NOT EXPANDED” and the “EXPANDED TOP” LDEVs and the count.
CU LDEV Count
0 08 2
0 0F 6
[-unallocated]
The output format is the same as the default output for list ldev.
The -l option output is the same as the default output for list ldev with the -l option.
[-emulation
<emulation type...>
]
The output displays only the LDEVs with the specified emulation types.
list ldev -emulation OPEN-E:OPEN-3 displays:
CU LDEV Emulation
0 00 OPEN-E
0 01 OPEN-E
0 0A OPEN-3
0 0B OPEN-3
list ldev -lu -emulation OPEN-E:OPEN-3 displays:
CU LDEV Count Emulation
0 08 2 OPEN-E
0 0F 6 OPEN-3
list ldev -cu 0 -ldev a-f -emulation OPEN-E:OPEN-3 displays:
CU LDEV Emulation
0 00 OPEN-E
0 01 OPEN-E
0 0A OPEN-3
0 0B OPEN-E
[-ldev
<ldev...>
]
If a disk array has LDEVs A to F in CU 0, and LDEVs A, B, D and E in CU 1, then list ldev -cu
0:1 -ldev A-F displays:
CU LDEV
0A
0B
0D
0E
0F
0A
1B
1D
1E
In the previous example, LDEVs 1:C and 1:F are not displayed because they do not exist.
The output format is the same as the default output for list ldev and list ldev with
-cmddev, -lu, -ldev, or -emulation, if those options are used. The output displays only the
specified LDEVs.
The -l option output depends on the options used. The output format is the same as the output for
list ldev -l and list ldev -l with -cmddev, -lu, -ldev, or -emulation, if those
options are used. The output displays only the specified LDEVs.