HP StorageWorks Command View XP Command Line Interface (CLI) reference guide (B9357-96161, January 2006)

92 CLI commands for the XP128/XP1024/XP10000/XP12000
Example list luse without any options displays all the expanded luns defined in the disk array.
CU LDEV DeviceLDEVs
0 00 01,02,03
0 0A 0B,0D,0E,0F
The -l option output displays all the expanded luns defined in the disk array along with the total
number of paths to this LUSE, emulation type, reserved status, device type, and capacity.
CU LDEV DeviceLDEVs TotalPaths Emulation Reserve DeviceType CAPACITY
0 00 01,02,03 0 OPEN-E RESERVE LUN 40
0 0A 0B,0D,0E,0F 2 OPEN-3 NORMAL CmdDev 10
[-cu <cu...> ]
The output format is the same as the output for list luse.
The -l option output is the same as for list luse with the -l option.
[-ldev
<ldev...> ]
The output format is the same as the default output for list luse.
The -l option output is the same as for list luse with the -l option.
If the -ldev option is used with the -cu option, the output consists of all the specified LUSEs in the
specified CUs.