HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
0610 69005
Either the emulation types
or the
SLPR numbers or the
both
for the multiple external
volumes you selected are not
the
same. When selecting
multiple volumes, select the
volumes that h ave the same
emulation type a nd the
same SLPR number.
When selecting multiple
volumes, select the volumes
that have the same
emulation type and the
same SLPR number.
W 0
0610 69006
There is an external volume
that the parameter setting
is
not completed. Complete
the parameter setting of all
external volumes.
Complete the parameter
setting of all external
volumes.
W
0
0610 69008
An emulation type cannot
be
applied is specified.
Set the em
ulation type that
can be app
lied in the Set
Externa
l
Volume Parameter
dialog b
ox
or Edit P olicy
dialog b
ox.
W
0
0610 69009
External volume that can
be
added was not detected
by
the search of V olume
Discovery.
Probable causes are:
•
Detected external
volumes are all defined.
•
Detected external
volumes are all blocked
or the
capacity is
insufficient.
•
The External Storage is
not installed.
All detected external
volumes may be defined,
blocked or the capacity
is
insufficient. Check the
setting of the external
volume or confirm whether
the program product is
installed.
W
0
0610 69010
The specified path
configuration cannot be
set.
Change the path
configuration so that
mapping paths match
cross-subsystem paths.
W 0
0610 69011
A virtual parity group (VPG)
cannot
be allocated to
theexternalvolumegroup
(ExG).
The number of external
volumes may have reached
the
maximum or the virtual
parity group (VPG) that can
be
set after the specified
external volume group (ExG)
does not exist. Check the
setting.
W
0
0610 69012
Cannot a llocate all LDEVs.
The area to allocate LDEVs
is
insufficient. Check the
setting.
W
0
100
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes