HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
1005 1011
An error occurred. If this
problem persists, please call
technical support.
The volume which links as
an expanded L U extend
over CU#. The error does
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
1005 1012
LU path is set to a volume
which links as an expanded
LU.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1013
The emul
ation types of the
volumes
combined into a
LUSE vol
ume
are not the
same.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
1005 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and
path at the same time.)
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1018
An error occurred. If this
problem persists, please call
technical support.
The specified port does not
exist. You have specified
awrong port number. Or
the sp e cified port type
(exclusively for mainframe)
cannot
be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
1005 1020
An error occurred. If this
problem persists, please call
technical support.
LUN is invalid. (The
specified value is not in the
specification.) The error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical support.
E
2
XP24000 Remote Web Console Error Codes
103