HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005 1196
You cannot create a LUSE
volume by concatenating
LUs and Cross-system Copy
LUs.
Please correct the settings,
then
retry.
E
6
1005 1197
You cannot set high-speed
mode
to a package
including an external
port.
Please correct the settings,
then
retry.
E
6
1005 1198
Since a path is defined to
an
external LU, you can not
set
high-speed mode.
Please correct the settings,
then
retry.
E
6
1005 1199
The path cannot be set
to
the specified volume
because the volume is not
an
open-systems volume.
Check the setting.
E
6
1005 1201
The selection of High Speed
mode/MIX mode is invalid.
The specified port cannot
be changed to High Speed
mode/MIX mode.
Change the parameter to a
path where the High Speed
mode/MIX mode can be
set, then retry the operation.
E
6
1005 1203
High Spe
ed
mode/MIX
mode
was specified.
However, there are
addresses to which High
Speed
mode/MIX mode
canno
tbeset in theFibre
Addre
sses
of the specified
port
s.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005
1204
High Speed mode/MIX
mode
was specified.
However, there are
topologies to which
High Speed mode/MIX
mode
cannot be set in the
topologies of the specified
ports.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1350
You c ould not add the path
to the initiator or external
port.
To add a path, change the
attribute of the specified port
to
Target or RCU Target.
E
6
1005 1351
The high-speed or
initiator/external mix
mode
cannot be set to the
specified port because of
the
attribute of the port.
Cannot set to high-speed
mode
because the
port attributes are
mixed, or cannot set to
internal/external mix mode
because the combination of
port attributes is different.
Check the port attributes,
then
retry the operation.
E
6
110
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes