HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
1205 58387
A communication error
occurred while executing
the
contents of the setting.
If thesameproblem persists
despite retrying, check the
LA N setting between the
SVP and the disk storage
system. If this problem
persists, call technical
support. (Please obtain
trace information by using
the F D Dump tool.)
W
5
1205 58388
PCB for iSCSI is not
mounted.
Check the settings. I f
this problem persists, call
technical support. (Please
obtain trace information by
using the FD Dump tool.)
i
5
1205 58389
The specified function is not
supported.
Check whether the
DKCMAIN microcode
version and the SVP
microcode version are
mismatched.
E 5
1205 58390
Microcode is being
replaced in the storage
system. Please retry
the
operation after the
microcode is replaced.
Retry the operation after the
microcode is replaced.
E 5
1205 58391
The specified port is
blocked.
If thesameproblem
persists despite retrying,
call
technical support.
E 5
1205 58392
The port is in Link Down
status.
Pleas
echeck thestatusof
cable
connection.
E 5
1205 58393
A communication
error occurred while
communicating with the
iSNS ser ver.
Please check the network
settings such as IP address.
E 5
1205
5839 4
An error occurred in the
registration process in the
iSNS ser ver.
Please check the status of
the iSNS server.
E 5
1205 58395
An
error occurred in the
de
letion process in the iSNS
se
rver.
Please check the status of
the iSNS server.
E 5
1205 58396
The candidate for deletion
does not exist in the iSNS
server.
Please check the status of
the iSNS server.
E 5
1205 58581
Because the target port was
not
created, the iSNS server
could
not be registered or
deleted.
Create the target port.
E 5
XP24000 Remote Web Console Error Codes
127