HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
3005
58464
The specified logical volume
cannot
be registered,
because it is a V-VOL.
Specify another logical
volume.
E
6
3005
58465
The volume set as a
Command Device cannot
be setasacomponentofa
Pool-VOL.
Specify another logical
volume.
E
6
3005
58466
The specified
logical volume
cannot
be reg
istered,
because an S
CSI path is set
to
the logic
al
volume.
Specify anot
her
logical
volume.
E
6
3005
5846 7
The specified volume cannot
be set as a Pool-VOL,
because it exceeds the
licensed capacity.
The current licensed
capacity is insufficient.
Please purchase a new
license key to increase the
licensed capacity.
E
6
3005 5846 8
The emulation t ype of the
logical volume is incorrect.
Specify another logical
volume.
E
6
3005
58469
The specified logical volume
is
being used by another
program product.
Specify a
nother
logical
volume.
E
6
3005
5847 0
The operation cannot be
done, because the usage of
the
specified Pool is 100%
(full).
Please add some Pool-VOL
or
decrease the Snapshot
data by restoring or deleting
snapshot
pairs.
E
6
3005
58471
The shared memory for the
V-VOL m anagement area is
insufficient.
Please install additional
shared memory for the
V-VOL management area.
E
6
3005
5847 2
Oper
ation of the pool has
fail
ed.
Pool
cannot be registered
when
:
•
V-V
OL
management
are
a
is not initialized.
•
V-V
OL
management
ar
ea is not
installed.
•
th
ere is no space left in
th
e
V-VOL management
a
rea.
•
t
he pool is
blocked.
•
t
he
state of shared
memory is abnormal.
Pool cannot be deleted
when:
•
V-VOL management
area is not initialized.
•
V-VOL management
area is not installed.
•
XP Snapshot pair still
remains in the pool.
•
P-VOL still remains in the
pool.
• the
pool is blocked.
When the pool cannot be
registered, do the following:
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
initialized.
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
installed.
•
check the free area of
the V-VOL management
area, when there is no
free area in the V-VOL
management area.
•
check the status of the
pool
when the pool is
blocked.
•
Status of the shared
memory by the
Maintenance window
of
S VP, when the state
of shared memory is
E
6
abnormal.
XP24000 Remote Web Console Error Codes
139