HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6005 8719
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
Check the serial number,
SSID, link address and
controller ID of the RCU,
and
set the correct value.
Then retry the operation.
If thesameerror occurs,
contact technical support.
E
4
6005 8720
Too many RCUs. (Four RCUs
are the maximum)
A maximum of four RCUs
are permitted, and that
many already exist.
i
4
6005 8721
Path not completely
established.
Check the path connections
between the MCU a nd
the RCU, then retry the
operation.
E
4
6005 8722
Failure during path creation.
Check the path connections
between the MCU a nd
the RCU, then retry the
operation.
E
4
6005 8723
The Edit Path operation
was rejected because the
specified path is the last
path of some Continuous
Access pairs.
Add another path, or d elete
all pairs on the RCU. Then
retry the operation.
i
4
6005
8724
Specifi
ed
number of paths
is
les
s
than the minimum
speci
fied on RCU Option
scree
n.
The specified number of
paths islessthanthe
minimum number of paths
specified on the RCU Option
window .
i
4
6005 8725
Current microcode version
does not support the
specified operation.
The version of the microcode
on the
storage system does
not
support the specified
function or operation.
Please call technical
support.
i
4
6005 8727
The number of minimum
paths exceeds the number
of
normal paths.
Please add the normal
path(s) , then set the
minimum number of paths.
i
4
6005 8728
Th
e
number of minimum
p
aths
exceeds the number
o
fnormalpaths.
Pl
ease
take either of the
fo
llowing actions:
1.
Ad
d
normal paths, then
d
elete the paths.
2
.
D
ecrease the number
o
f
minimum paths, then
delete the paths.
i
4
6005 8729
An internal error occurred.
Please call technical
support.
E
4
6005 8730
Invalid Logical Addresses
are specified.
1. If you are adding RCUs,
specify the same logical
address.
2. If
you are editing paths,
specify the same logical
address as the existing
paths. (See the Edit
Path Screen.)
i
4
XP24000 Remote Web Console Error Codes
199